FUNAI CSV20PFD owner manual Special Playback Function, Repeatprogram, Random Playback

- 23 -

SPECIAL PLAYBACK FUNCTION

REPEATPROGRAM

REPEAT is available only during playback.

REPEAT TITLE / CHAPTER

DVD-V

To activate the repeat function, press [REPEAT] during playback.

¡The repeat mode changes as described below every time you press the button.

CHAPTER	TITLE	OFF
(current chapter repeat)	(current title repeat)	(repeat off)
NOTES:

¡Repeat Title/Chapter is not available with some scenes.

¡The REPEAT setting will be cleared when moving to other title or chapter.

REPEAT TRACK

CD

To activate the repeat function, press [REPEAT] during playback.

¡The repeat mode changes as described below every time you press the button.

TRACK	ALL	OFF
(current track repeat)	(entire disc repeat)	(repeat off)
NOTES:

¡Repeat Track setting will be cleared when moving to other track.

¡Repeat playback does not function during A-B repeat playback.

A-B REPEAT

DVD-V CD

1Press [A-B] at your chosen starting point.

¡“ A-” appears briefly on the TV screen.

2Press [A-B] again at your chosen end point.

¡“ A-B” appears briefly on the TV screen, and the repeat sequence begins.

3To exit the sequence, press [A-B].

NOTES:

¡The A-B repeat section can only be set within the current title (for DVDs) or current track (for Audio CDs).

¡A-B repeat is not available with some scenes in DVD.

¡To cancel the A point which was set, press [CLEAR].

¡A-B repeat playback does not function during title, chapter, track or all repeat playback.

CD

You may determine the order in which tracks will play.

1In the stop mode, press [MODE].

¡The “PROGRAM” screen will appear.

2Press [K/L] to select a track, then press

[ENTER].
¡Press [CLEAR] to erase the
most recently entered track.		CD-DA		TOTAL 1:03:30
¡If the entire Program cannot be	PROGRAM
		3	5:00	10	4:20
		1	3:30	1	3:30
		2	4:30	5	5:10
displayed at once on a screen,		4	3:10	11	3:00
		6	1:30	12	3:20
		5	5:10
				17	4:10
“ G” appears to go to the next	ENTER	7	2:30	22	2:50
		1	1/4		2/3
	CLEAR		3:30
	PLAY
page and “ H” appears to go
back to the previous page.

3Repeat step 2 until you have selected all the tracks you want to play in the program.

4Press [PLAY O] to play the programmed

tracks.

NOTES:

¡While the program is being played back, pressing [STOP C] works as follows.

¡Press [STOP C] once and then [PLAY O] again, playback will restart from the point where [STOP C] was pressed. (Program continued)

¡Press [STOP C] twice and then [PLAY O] again, playback will restart from the track in the usual way. (Program canceled)

¡Up to 99 tracks can be entered.

¡To erase all tracks in the program at once, select “ALL CLEAR” at the bottom of the list at step 2.

¡If you like to repeat the current track in the program, press [REPEAT] several times until “ TRACK” appears during playback. If you like to repeat the entire program press [REPEAT] several times until “ ALL” appears during playback.

RANDOM PLAYBACK

CD

This function shuffles the playing order of tracks instead of playback in the sequence.

1In the stop mode, press [MODE] twice.

¡“RANDOM” screen appears.

RANDOM

CD-DA TOTAL 0:45:55

RANDOM PROGRAM

- - no indication - -

PLAY

2Press [PLAY O] to start random playback.

NOTE:

¡If you like to repeat the current track in the random

selection, press [REPEAT] several times until

“ TRACK” appears during playback. If you like

to repeat the entire random selection press [REPEAT] several times until “ ALL” appears

during playback.

EN