–13 –EN
0C28

SELECTING THE LANGUAGE

1Plug in the unit power cord
Plug the unit power cord into a standard
AC outlet.
NOTE:
•If any digits appear in the corner of
the screen, press POWER without
unplugging the power cord.
Make sure ...
•Press POWER to turn on the unit.
NOTE: This function effects only the language on
the screen menu and not the audio source.
2Select “LANGUAGE”
Press SETUPon the remote control.
Press Arrow (K/L) to point to
“LANGUAGE”.
3Select “ENGLISH”,“ESPAÑOL”or “FRANÇAIS”
Select “ENGLISH”, “ESPAÑOL”= Spanish or
“FRANÇAIS”= French using ENTER.
4Exit the Language mode
Press SETUPto return to TV mode.
NOTE: If for some reason the menu is in Spanish or
French, press SETUP, press Arrow (K/L) to point to
“IDIOMA[ESPAÑOL]” or “LANGAGE
[FRANÇAIS]”, then press ENTER, then press
SETUPon the remote control.
TV

CHANNEL SET UP

You can program the tuner to scan all the channels
you receive in your area.
NOTE: Channel memory programming is NOT
needed when connected to a cable box or satellite
box. Just select the unit channel selector to the output
channel of the cable box or satellite box
(Ex CH3), then select the channel to be viewed on
the Cable Box or Satellite Box.
Make sure ...
•Press POWER to turn on the unit.
1Select “CHANNEL SET UP”
Press SETUPon the remote control.
Press Arrow (K/L) to point to
“CHANNELSET UP”.
Then press ENTER.
2Begin auto ch programming
Press Arrow (K/L) to point to
“AUTO CH PROGRAMMING”.
Then press ENTER.
The tuner scans and memorizes all
the active channels in your area.
3After scanning
The tuner stops on the lowest memorized channel.
•When AUTO CH PROGRAMMING is activated
where there is no TVsignal input, “NO TV SIG-
NALS” will appear on the display after the com-
pletion of the channel scanning.
•The unit may recognize CATVchannels to be TV
channels if the reception conditions are poor. In
this case, check the antenna connection and try
auto ch programming again when reception condi-
tions are better.
TV
SET UP FOR USE

TV SECTION

- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
BLANGUAGE [ENGLISH]
CAPTION [OFF]
- TV SETUP -
BCHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
BAUTO CH PROGRAMMING