–16 –EN
0C28
CLOSED CAPTION SYSTEM
You can view specially labeled (cc) TVprograms,
movies, news, etc. with either a dialogue caption or
text display.
CAPTION mode: By choosing the caption mode, you
can watch dramas, movies and news while captioning
the dialogues and the contents of news.
TEXT mode: By choosing the text mode, you can
watch half screen text information if you want.
1-2:You may get these captions or text information
by selecting either “1” or “2”. Caption “2” is used,
usually for a second language if available.
NOTE:
Not all programs are broadcast with closed captions.
Your television is designed to provide error free
closed captions from high quality antenna, cable and
VCR signals. Conversely, poor quality signals are
likely to result in caption errors or no captions at all.
Common signal conditions which may cause captions
errors are listed below:
•Automobile ignition noise
•Electric motor brush noise
•Weak snowy reception on TVscreen
•Multiplex signal reception displaying picture
ghosts or airplane flutter.
TV
NOTE:
If the unit displays a black box on
the TVscreen, this means that the
unit is set to the TEXTmode. To
clear screen, select [CAPTION1],
[CAPTION2] or [OFF].
Make sure ...
•The unit must be turned on.
1Select “CAPTION”
Press SETUPon the remote control.
Press Kor Lto point to “CAP-
TION”.
2Select your desired caption menu
Press ENTER until your desired
caption menu appears.
([CAPTION1], [CAPTION2],
[TEXT1] or [TEXT2])
3Exit the caption setting mode
Press SETUPto return to TV mode.

TO CANCEL THE CLOSED CAPTION

SYSTEM

Repeat steps [1] to [2], and select [OFF] using
ENTER. Press SETUPon the remote control to
return to TVmode.
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
BCAPTION [OFF]
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
BCAPTION [CAPTION1]
This function enables you to shut off the unit without
pressing POWER after a desired time period.
1Set “SLEEP TIMER”
Press SLEEPon the remote control.
You may change the sleep time by
pressing SLEEPrepeatedly. Each
time SLEEPis pressed, the time
increases by 30 minutes up to 120
minutes.
NOTES:
•When you disconnect the unit from the AC outlet,
or if you have a power failure, the sleep time will
be lost.
•To confirm the time left for sleep timer, press
SLEEPonce. After 10 seconds, display will disap-
pear.
To cancel the sleep timer:
Press SLEEPrepeatedly until “SLEEP 0 MINUTE”
is displayed.
TV
SLEEP 120 MINUTE
SLEEP TIMER