H9410UD(EN).qx33 03.1.14 9:21 PM Page 15
CONNECTING TO A DOLBY DIGITAL DECODER
If using this DVD/VCR COMBINATION UNITS to play a DVD disc in 5.1 channel Dolby Digital surround, the DVD/VCR COMBINATION UNITS outputs a Dolby Digital data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the DVD/VCR COMBINATION UNITS up to a Dolby Digital decorder, you can enjoy a more convincing, realistic ambience with powerful and
Use an audio coaxial digital cable (commercially available) for the audio connections.
Front speaker (left)
Center speaker
Dolby Digital decoder
DVD/VCR | VCR |
| DVD |
AUDIO OUT |
| ||
| OUT VIDEO OUT | OUT | |
L |
| Y |
|
R | AUDIO IN | Cb | L |
|
|
| |
| VIDEO IN | Cr | R |
Front speaker
(right)To COAXIAL DIGITAL AUDIO OUT jack
To COAXIAL DIGITAL
AUDIO INPUT jack
DIGITAL
AUDIO OUT
COAXIAL
Surround
speaker (left)
Surround | Subwoofer | ||||||
speaker |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(right) |
|
|
|
|
|
|
|
[Fig. 5]
¡If the output is Dolby Digital audio, connect to a Dolby Digital decorder, and set DOLBY DIGITAL to ON for audio output in the setup mode.
¡Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
Manufactured under license from Dolby Laboratories. “Dolby” and the
CONNECTING TO AN ANALOG AUDIO
DVD/VCR | VCR | DVD |
|
AUDIO OUT |
| DIGITAL | |
| OUT VIDEO OUT OUT | AUDIO OUT | |
L |
| Y |
|
Stereo system |
|
|
R AUDIO IN | Cb | L L |
| COAXIAL | |
VIDEO IN | Cr | RR |
To ANALOG AUDIO INPUT jacks
To Right (red) and Left (white) | [Fig. 6] | |
AUDIO OUT jacks | ||
|
Notes
¡Be sure to turn off the power to all components in the system before connecting another component.
¡Refer to the Owner's Manuals for stereo systems and any other components to be connected to the DVD/VCR COMBINATION UNITS.
– 15 – | EN |
1L25
