FUNAI F313CB, F319CB owner manual Selecting the Language, To Cancel the DAYLIGHT-SAVING Time

1Select “CHANNEL SET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “CHANNEL SET UP”.

Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK

BCHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

2Select “ENGLISH” or “ESPAÑ OL”

Select “ENGLISH” or “ESPAÑOL”= Spanish using the F.FWD/B or REW/s button.

3Exit the Language mode

Press the MENU button on the remote control to return to TV mode.

2 Select “ADD/DELETE CH” – CHANNEL SET UP –

Press the PLAY/K or STOP/L but- B ADD / DELETE CH (TV)

NOTE: If for some reason the menu is in Spanish, press the MENU button on the remote control, press the PLAY/K button to point to “IDIOMA

ton to point to “ADD/DELETE CH”.

Press the F.FWD/B button.

AUTO PRESET

[ESPAÑOL]”, then press the F.FWD/ B button, then press the MENU button on the remote control.

DAYLIGHT-SAVING TIME

3Enter the desired channel number

Press the PLAY/K or STOP/L but- ton until your desired channel num- ber appears. (You can also use the number buttons or the CHANNEL K/L button to enter it) (Example: CH8)

08

ADD / DELETE

Select this feature and the TV/VCR’s clock automati- cally will advance one hour in April, then reverse one hour in October.

When Daylight-Saving Time is ON, the clock will change automatically as follows:

• First Sunday of April : At 2 AM the clock imme-

diately changes to 3 AM. Any timer programming

you have set to occur between 2 AM and 3 AM

4Delete (or add) it from (into) memory

Press the F.FWD/B or REW/s button. The channel number changes to light red. The channel is deleted from memory.

•To delete another channel, repeat steps [3] and [4].

•If you press the F.FWD/B or REW/s button again, the channel is memorized again.

will not record.

• Last Sunday of October : At 2 AM the clock

immediately changes to 1 AM.

Make sure ...

•Press the POWER button to turn on the TV/VCR.

Added channel: Light blue.

Deleted channel: Light red.

5Exit the channel setup mode

Press the MENU button on the remote control to returns to TV mode.

1Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “SETTING CLOCK”.

Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL K or L button.

SELECTING THE LANGUAGE

Make sure ...

•Press the POWER button to turn on the TV/VCR. NOTE: This function effects only the language on the screen menu and not the audio source.

1Select “LANGUAGE”

–M E N U –

Press the MENU button on the	TIMER PROGRAMMING
remote control.	PICTURE CONTROL
	CHANNEL SET UP
	SETTING CLOCK
Press the PLAY/K or STOP/L but-	USER’S SET UP
	B LANGUAGE [ENGLISH]
	V-CHIP SET UP
ton to point to “LANGUAGE”.	CAPTION [OFF]
	ZERO RETURN
	TIME SEARCH

2Set “D.S.T.” (Daylight-Saving Time) to [ON]

Press the PLAY/K or STOP/L but-	– SETTING CLOCK –
ton to point to “D.S.T.”.	AUTO CLOCK	[ON]
Then, press the F.FWD/B or	AUTO CLOCK CH	[AUTO]
REW/s button until [ON] appears.	MANUAL CLOCK SET
	B D.S.T.	[ON]

3Exit the Daylight-Saving Time mode

Press the MENU button on the remote control to return to TV mode.

TO CANCEL THE DAYLIGHT-SAVING TIME

Repeat steps [1] to [2], select [OFF] using the F.FWD/B or REW/s button.

- 13 - EN

9I03