FUNAI F313CB, F319CB owner manual Auto Repeat Playback, Normal Playback, Inserting a Cassette

RENTAL[OFF]

B REPEAT PLAY [ALL]

AUTO RETURN [OFF]

– USER’S SET UP –

PLAYBACK

This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not us poor quality or damaged tapes.

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.

Window

AUTO REPEAT PLAYBACK

The TV/VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button.

ALL REPEAT: Repeat playback from the beginning to the end of the tape.

BLANK REPEAT: Repeat playback from the begin- ning to a blank part, which is blank for more than 10 seconds.

CORRECTWRONG

NORMAL PLAYBACK

Make sure ...

•TV/VCR power must be turned on.

1Select “USER’S SET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “USER’S SET UP”. Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP

BUSER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

1Insert a prerecorded tape

If the erase-protection tab has been removed, the TV/VCR will start playback automatically.

2To begin playback

Press the PLAY button. Note:

If any menu is activated on the screen, the PLAY but- ton does not function. Press the MENU button to clear the menu. then, press the PLAY button.

If a tape is already on the TV/VCR with power off 2A) Press the PLAY button on the TV/VCR. Power will automatically turn on and playback will start.

(Direct button operation)

2B) Use the remote control;

Press the PPOWER button to turn the TV/VCR on, and then press the PLAY button on the remote con- trol.

3To stop playback

Press the STOP button when playback is completed.

2Select “ALL” or “BLANK”

Press the PLAY/K or STOP/L button to point to “REPEAT PLAY”.

Press the F.FWD/B or REW/s button repeatedly until your desired selection [ALL] or [BLANK] appears.

3Exit the Repeat Play setting

Press the MENU button on the remote control to return to the TV mode.

4Start playback

Press the PLAY button to start the Repeat Play. ”REPEAT PLAY B” appears.

•Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/VCR.

•If the Rental mode is set [ON], the “RENTAL PLAY B” display has priority.

TO CANCEL THE REPEAT PLAY MODE

Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode.

If there is a power failure of any kind, the unit will retain its memory for this feature.

- 17 - EN

9I03