USING YOUR RANGE
USING THE ELECTRONIC MINUTE TIMER (CONT.)
When the time is up: | YOU SEE |
You will hear four |
|
| |
press the timer off pad. | TIMER |
| |
NOTE: To remove the reminder tones, press and |
|
hold TIMER SET for 5 seconds. To bring back |
|
the tones, follow the same step. You will see |
|
“OFF” when the tones are turned off and “on” |
|
when they are turned on. |
|
4. Turn off the minute timer. | PRESS | YOU SEE |
| TIMER |
|
| OFF |
|
|
| (time of day) |
To cancel the minute timer:
PRESS | YOU SEE |
Press TIMER OFF. | TIMER |
| OFF |
STARTING/CANCELING A FUNCTION
After setting a function, you must press START/ ENTER to start the function. If you do not press START/ENTER within 5 seconds of setting, “START?” will show on the display as a reminder.
OFF/CANCEL will cancel any function except the
| clock, timer, or control lock. When you | |
OFF | press OFF/CANCEL, the display will show | |
the time of day or, if the minute timer is | ||
CANCEL | ||
also being used, the time remaining. | ||
|
Tones tell you if a function is entered correctly or not. They also tell you when a cycle is completed.
To shut off all tones except the
Press and hold STOP TIME for 5 seconds. A short tone will sound to tell you the tones have been changed. Repeat to turn the tones back on. You will see “oFF” for 3 seconds when the tones are turned off and “on” for 3 seconds when they are turned on.
Press and hold DELAY START TIME for 5 seconds. A short tone will sound to tell you the tones have been changed. Either “HI” or “LO” will appear on the time display for 3 seconds to show the volume you chose.
12