FUNAI IWF2706 owner manual Press VOL Using CH K/L, select Auto Preset Chdtv, Chtv/Dtv

DTV

When scanning DTV only

1Select digital mode by pressing [DTV/TV].

2Display the menu screen.

•Press [MENU].

The following menu screen is displayed.

PICTURE CHANNEL SET [ENG]/ESP/FRA

V-CHIP SET UP CAPTION [OFF] DTV SET UP

3Select "CHANNEL SET".

• Using [CH K/L], select "CHANNEL SET".

PICTURE

CHANNEL SET [ENG]/ESP/FRA

V-CHIP SET UP CAPTION [OFF] DTV SET UP

• Press [VOL X].

4Using [CH K/L], select "AUTO PRESET CH(DTV)".

ADD/DELETE(DTV)

AUTO PRESET CH(DTV) AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV)

! CATV takes approx. 50min.

DTV TV

When scanning both TV and DTV at the same time

*You can access this menu from both modes (analog / digital).

1Display the menu screen and select ”CHANNEL SET".

•Press [MENU] and select "CHANNEL SET" using [CH K/L].

PICTURE

CHANNEL SET [ENG]/ESP/FRA

V-CHIP SET UP CAPTION [OFF]

DTV SET UP	SETTINGS
• Press [VOL X].
2 Using [CH K/L], select "AUTO PRESET	OTHER
CH(TV/DTV)".

ADD/DELETE(DTV)

AUTO PRESET CH(DTV)

AUTO PRESET CH(TV/DTV)

AUTO PRESET CH(CATV)

!CATV takes approx. 50min.

•Press [VOL X].

Scanning and memorizing the channels auto- matically starts.

AUTO PRESET CH(TV/DTV)

•Press [VOL X].

Scanning and memorizing the channels auto- matically starts.

AUTO PRESET CH(DTV)

•When the scanning and memorizing are com- pleted, the memorized smallest channel in the digital broadcasting will be displayed.

•When the scanning and memorizing are com- pleted, the memorized smallest channel in the analog broadcasting will be displayed. If no analog channel is memorized, the memorized smallest channel in the digital broadcasting will be displayed.

NOTES:

•If you press [POWER] or [MENU] while setting AUTO PRE- SET CH, AUTO PRESET CH setting will be canceled.

•If there is no TV signal input, "NO TV SIGNALS" will appear on the display after the completion of channel scanning.

NO TV SIGNALS

29

EN