–11 –EN
CONNECTING TO EXTERNAL INPUT JACKS
When you watch a program recorded on another
source (VCR or video camera), use the audio/video
input jacks on the front of the unit.
Connect the audio/video output
jacks of another source to the
AUDIO L/R and VIDEO jacks of
this unit. Then hit [SELECT] until
"AUX" appears on the screen.
NOTE:
•When you connect a monaural VCR (another
source) to this unit, connect the Audio output jack
of the monaural VCR (another source) to the
AUDIO Ljack of this unit. The audio will output in
both Land R channel equally.
STANDBY-ON
VIDEO
L –AUDIO– R
VIDEO
L –AUDIO– R
[Another source]
To th e
audio out-
put jacks
Audio/Video
cables
(not supplied)
etc.
To the video
output jack
[Front of the unit]
AUX
[Fig. 5]
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITALINPUT JACKS, MD DECK OR DATDECK (for DVD only)
Use an audio coaxial digital cable (commercially available) for the audio connections.
NOTES:
•The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DATdeck.
•Be sure to turn off the power to all components in the system before connecting another component.
•Refer to the Owner's Manuals for the components to be connected to the unit.
•Set DOLBYDIGITAL to OFF for audio output in the setup mode. Playing a unit using incorrect settings
may generate noise distortion and may also damage the speakers. (See page 28 to set DOLBYDIGITAL to
OFF.)
COAXIAL
ANT.
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
Audio coaxial digital
cable
(commercially available) To CO AXIAL jack
(Only DVD AUDIO OUT)
To Coaxial digital
Audio input jack
[Fig. 6]