14 EN
DELETING (OR ADDING)CHANNEL(S)
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)
1Select “CHANNEL SET UP”
Hit [SETUP] on the remote control.
Press [KK/ LL]to point to “CHAN-
NELSET UP”.
Then hit [ENTER].
2Select “ADD/DELETE CH”
Press [KK/ LL]to point to
“ADD/DELETE CH”.
Hit [ENTER].
3Enter the desired channel number
Press [KK/ LL]until your desired
channel number appears. (You can
also press the Number buttons or
[CH. KK/ LL]to enter it) (Example:
CH8)
You must precede single-digit
channel numbers with a zero (Example: 02 ... 09).
When selecting cable channels which are higher
than 99, hit [+100] first, then hit the last two digits.
(Example: to select channel 125, first hit [+100],
then press [2] and [5]).
4Delete (or add) it from (or into) memory
Hit [ENTER]. The channel number changes to light
red. The channel is deleted from memory.
To delete another channel, repeat steps 3to 4.
If you hit [ENTER] again, the channel is memo-
rized again.
5Exit the channel setup mode
Hit [SETUP] to return to TV mode.
NOTE: To confirm that channel(s) has been deleted
or added, press [CH. KK/ LL].
TV
- TV SETUP -
BCHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
Added channel:Light blue .
Deleted channel: Light red.
08
ADD / DELETE
– CHANNEL SET UP –
BADD / DELETE CH (CATV)
AUTO CH PROGRAMMING