FUNAI V07LCD15 owner manual Change Password, Enter password again in Confirm Password space

OPTIONAL SETTING

C. Change Password

Although the default code “0000” is supplied with the unit, you can set your own password.

4 Use [Cursor K/L] to select “CHANGE PASSWORD”, then press [ENTER].

e.g.) digital TV mode

or

- V - CHIP SETUP -

TV RATING MPAA RATING DOWNLOADABLE RATING CHANGE PASSWORD

5 Press [the Number buttons] on the remote control to enter the new 4-digit password.

•Enter password again in “CONFIRM PASSWORD” space.

NEW PASSWORD

_ _ _ _

CONFIRM PASSWORD

_ _ _ _

6 Press [SETUP] to exit.

Note:

•Make sure new password and confirm password must be exactly the same. If they are different, the space is cleared for reentering.

•Your password will be erased and return to the default (0000) when a power failure occurs. If you forget the password, unplug the power cord for 10 seconds to restore the password to 0000.

24

EN