Furman Sound PF-Pro, PF-Pro R Power Factor pro manual, Important Note, Specifications

Power Factor pro manual

Important Note:

The Power Factor Pro must be the first AC power component connected to the AC mains!

Regulators such as the Furman AR-1215 or UPS systems such as the SB-1000 must be connected to the Power Factor Pro’s output. This is due to the fact that the PF-Pro’s current reservoir may hinder the performance of a regulator, and worst case may cause damage in extreme power environments.

As long as the Power Factor Pro is connected prior to the Regulator or UPS both components may be used.

SPECIFICATIONS

Current rating:

12 amps (“E” versions 7 amps)

Operating Voltage:

90 to 140 VAC (“E” versions 180 to 280 VAC)

Over Voltage Shutdown:

140 VAC typically (“E” versions 280 VAC typically)

Voltmeter Accuracy:

±2 VAC, calibrated with internal trimpot adjustments

Spike Protection Modes:

Line to neutral, zero ground leakage

Spike Clamping Voltage:

188 Vpk @ 3,000 amps (133 VAC RMS) (tested to UL-1449 6,000 Vpk @ 3,000 amps)

Response time:

1 nanosecond

Maximum surge current: 6,500 amps

121304-E

Noise attenuation: 40 dB @ 10 kHz 40 dB @ 100 kHz 100 dB @ 10 MHz

Linear attenuation curve from 0.05 - 100 ohms line impedance

Transient Current Reservoir: 45 amps peak

Mechanical:

Dimensions:

PF-Pro: 5.25” H (with feet) x 8.125” W x 12.5” D.

PF-Pro R: 19 “ W x 11.63” D x 1.75” H

Weight: PF-Pro: 11 lbs (5 kg). PF-Pro R: 9.7 lbs (4.39 kg)

Power Consumption: 6 watts (resistive) 420 watts (reactive)

Safety Agency Listings:

CE, ETL-C (pending)

Furman Sound, LLC. 1997 South McDowell Blvd.

Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310

Web: www.furmansound.com E-mail: info@furmansound.com

7