Furman Sound PF-Pro, PF-Pro R manual Trouble-Shooting Guide, Three Year Limited Warranty

Power Factor pro manual

TROUBLE-SHOOTING GUIDE

1.) Symptom: No power to the AC outlets.

Possible Cause: Circuit breaker has tripped due to excessive load.

Action Needed: Remove one piece of equipment from the Power Factor Pro unit, and push the square re-set tab into the circuit breaker bezel.

2.) Symptom: No power to the AC outlets, “Protection OK” indicator is not lit.

Possible Cause: Either the AC outlet that your Power Factor Pro device is connected to has no AC voltage present, or the unit has been subjected to a sustained voltage in excess of 400 volts.

Action Needed: Plug the Power Factor Pro unit into an AC receptacle where AC voltage is present. If the problem persists, the protection circuit may be damaged factory service may be required.

3.) Symptom: Extreme Voltage indicator lit.

Possible Cause: Input voltage is above 135 - 140 volts, causing power to the unit’s outlets to be shut down. Additionally, if the voltage is below 85-90 volts at turn on, the unit will not allow AC voltage to reach the outlets.

Action Needed: Correct the line voltage. Then turn the unit on. Consider installing a Furman voltage regulator.

Three Year Limited

Warranty

Furman Sound, LLC., having its principal place of business at 1997 South McDowell Blvd., Petaluma, CA 94954 (“Manufacturer”) warrants its PF-Pro and PF-Pro R (the “Product”) as follows:

Manufacturer warrants to the original Purchaser of the Product that the Product sold hereunder will be free from defects in material and workmanship for a period of three years from the date of purchase. The Purchaser

of the product is allowed fifteen days from the date of purchase to complete warranty registration by mail or on-line at the Furman website. If the Product does not conform to this Limited Warranty during the warranty period (as herein above specified), Purchaser shall notify Manufacturer in writing of the claimed defects. If the defects are of such type and nature as to be covered by this warranty, Manufacturer shall authorize Purchaser to return the Product to the Furman factory

or to an authorized Furman repair location. Warranty claims should be accompanied by a copy of the original purchase invoice showing the purchase date; this is not necessary if the Warranty Registration was completed either via the mailed in warranty card or on-line website registration. Shipping charges to the Furman factory or to an authorized repair location must be prepaid by the Purchaser of the product. Manufacturer shall, at its own expense, furnish a replacement Product or, at Manufacturer’s option, repair the defective Product. Return shipping charges back to Purchaser will be paid by Manufacturer.

THE FOREGOING IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED

5