Furman Sound SRM-80A owner manual To a NI

SRM - 80A / E – SIGNAL ROUTER/MONITOR

source select knobs labeled OUTPUT SE- LECT A through OUTPUT SELECT D.

Monitoring any of these sources can be done using the MONITOR SELECT knob, high- power headphone amp and uniquely thought- out speaker selection system that consists of three balanced line level speaker outputs A, B, and C. All of these outputs are compatible with powered monitors or passive speakers using a power amp. The unique feature is that the B and C outputs can be combined into one output for use with 2 pairs of passive speakers and only one power amp. See description of

B/C AMP/SPK Switch. Each monitor speaker output has its own front panel trim control, so equal listening levels can be maintained de- spite differences in speaker effi ciencies.

The SRM-80A has balanced inputs for the SOURCE and A inputs, and balanced outputs for channel A output and A, B, and C moni- tor line outputs. INPUTS B through D utilize unbalanced RCA jacks. The SRM-80A allows easy signal routing between these dissimilar jacks.

SYSTEM SETUP 2

MO NITOR LINE OUTPUT A
PO W ERED	SPEAKERS	MO NITOR LINE OUTPUT B			PASSIVE SPEAKERS
		PO W ERED SPEAKERS
					PO W ER AM PLIFIER
		MO NITOR LINE		INP UT			OU TPUT
		OU TPUT B
	MO NITOR LINE OUTPUT A					HEADPHO NES
				MO NITOR LINE
				OU TPUT C	SET SW ITCH
TO “A” NI					TO AM P-B/C
OU TPUT	FROM	“A” OUT	SRM -80A		FROM	“C” OUT
	INP UT				TO “C” NI
							INP UT
			TO SOURCE IN			OU TPUT
DAT RECORDER
TO "B" NI						MINIDISC
OU TPUT	FROM “B” OUT				FROM	“D” OUT
	INP UT
					TO “D” NI
						OU TPUT	INP UT
CASSETTE RECOR DER		SRM -RU	SOURCE MIXER		COM PACT DISCPLAYER
						-RECOR DER-

3