Furman Sound SRM-80A owner manual Po W E R Amp S

SRM - 80A / E – SIGNAL ROUTER/MONITOR

plug. Never use a three-prong to two-prong		B/C position: Only the “A” and “B” monitor
AC plug adapter to plug your SRM-80A into		line outputs are used and the “B” amplifi er’s
your wall socket.		speaker outputs are connected to the “FROM
ON/OFF: Controls power to unit.		AMP (B) OUTPUT” binding posts. The B
		and C speaker outputs are combined to the
AMP-B/C & SPK-B/C SWITCH: When the B/C		SPEAKER B output jacks. This is to be used
switch is in the AMP-B/C position: The input		with a single power amp and 2 pairs of pas-
selected by the Monitor Select switch is routed		sive speakers via the binding posts on rear
through the Monitor level control and sent to		panel. Connect the SPEAKER B/POWER
the “A”, “B” or “C” monitor line outputs (as		AMP IN jacks to the input of your power amp.
selected with the “A”, “B” or “C” pushbuttons).		Connect the output of your power amp to the
B and C speaker outputs and output signals		FROM AMP OUTPUT Binding posts. Connect
are separate for use as individual outputs with		1 pair of passive speakers to the SPEAKER
either powered speakers or passive speakers		B binding posts and the other pair of passive
with a power amp. See Figure A.		speakers to the SPEAKER C binding posts. To
When the AMP/SPK B/C switch is in the SPK-		select the associated amplifi er / speaker press
		the “A”, “B,” or “C” speaker select buttons on
		the front panel. See Figure B.
FIGURE A
	C O NN E C T IO N S FO R 3 P IR S O F PO W E R E D
	S PEAK E R S O R PA SS I E S PEAK E R S WITH
AMP-B/C SPK-	S E PA RA TE	PO W E R AMP S
B/C SWITCH IS

SET TO AMP-B/C

AMP-B/C	120 VAC INPUT 60 HZ	MADE IN CHINA	SPEAKER C	SPEAKER B		FROM AMP(B)	REMOTE
	GROUND	ON				OUTPUT			L	L
							USE MODEL
		AMP-B/C					SRM-RU
	LIFT						ONLY	C	B	A
	5 WATTS	L	R	L	R	L	R
SPK-B/C		SPK-B/C							R	R
		OFF	CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT REMOVE COVER.					CONNECT TO POWERED MONITORS
	AVIS:N'OUVREZ PAS-RISQUE DE CHOC ELECTRIQUE					REFER SERVICING TO QUALIFIED PERSON			OR POWER AMPLIFIERS INPUTS
		SPEAKER	C	SPEAKER B	INPUT FROM
		OUTPUT IS		OUTPUT IS	AMP IS NOT
		NOT USED		NOT USED		USED

CONNECT LINE OUTPUTS A, B AND C TO THE INPU OF POWERED SPEAKERS OR POWER AMPLIFIERS.

FIGURE B

C O NN E C T IO N S FO R 2 P IR S O F PA SS I E AMP-B/C SPK- S PEAK E R WITH A S ING LE PO W E R AMP

B/C SWITCH IS

SET TO SPK-B/C

BOTH LINE OUTPUTS B AND C WILL BE PRESENT AT THE B 1/4" OUTPUTS.

AMP-B/C

GROUND

ON

SPEAKER C

SPEAKER B

OUTPUT

REMOTE

120 VAC INPUT 60 HZ

MADE IN CHINA

FROM AMP(B)

USE MODEL

L

L

AMP-B/C

SRM-RU

LIFT

ONLY

C

B

A

5 WATTS

L

R

L

R

L

R

SPK-B/C

SPK-B/C

R

R

OFF

CAUTION:

CONNECT TO POWERED MONITORS

AVIS:N'OUVREZ PAS-RISQUE DE CHOC ELECTRIQUE

TO PREVENT ELECTRIC SHOCK DO NOT REMOVE COVER.

REFER SERVICING TO QUALIFIED PERSON

OR POWER AMPLIFIERS INPUTS

CONNECT

CONNECT

CONNECT

NO SIGNAL WILL

BE PRESENT AT

PASSIVE

PASSIVE

OUTPUT OF

THE 1/4" LINE

SPEAKERS TO

SPEAKERS TO

AMPLIFIER TO

OUTPUT C

SPEAKER C

SPEAKER B

THESE INPUTS

OUTPUTS

OUTPUTS

CONNECT LINE OUTPUT A TO THE INPUTS OF POWERED SPEAKERS OR POWER AMPLIFIER.

7