21
3. SETTING UP THE EQUIPMENT 3.1 Setting up with the Installation Wizard
After you have installed the equipment , set up the equipment with the installation wizard.
The wizard allows you to easily set up the NavN et network (choose source of radar,
sounder and auxiliary), GPS, ports, etc.
1. Press the POWER/BRILL key to turn on the power, and the f ollowing screen appears.
NEXT
EXIT
ENTER
INSTALL
WIZARD
LANGUAGE
▲
~
ENGLISH
{ FRANCAIS
{ DEUTSH
{ ITALIANO
{ PORUTGES
{ ESPANOL
{ DANSK
{ SVENSKA
{ NORSK
▼
Installation wizard, language select ion window
2. Rotate the ENTER knob to choose the appropriate language and then push the ENTER
soft key.
3. A dialog box asks you if you want to start the simulation mode, which provides
simulated operation of the equipment.
4. Press the CLEAR key to skip the simulation mode. Then, the SELECT MODE window
appears.
SELECT MODE
▲
~ INST. WIZARD
{ INST. MODE
{ SIMPLE CHECK MODE
{ NORMAL MODE
▼
CHANGE OR CONFIRM THE ITEMS SHOWN
ABOVE. THEN PUSH [NEXT] WHEN DONE.