25
gniRegnaR niegnarehtfo4/1foslavretnitadettolperasgniregnarehT .sgniregnarowtyrevededivorposlaeraatadgniregnaR.esu ehtfo2/1ot4/1morfderetlaebnaclavretnigniregnarehT nacsnognittesetairporppaehtgnignahcybesuniegnar .unem
gniraeB/egnaR skraM ehtnehwdeyalpsideraskramgniraebdnaegnarehT B/R yek
spetseergedwefanisnacskramgniraebehtdnadesserpsi ehtnehw NACSROTCES nioiduagnivig,desserpsiyek sserp,kramgniraebehtfogninnacsehtpotsoT.noitceridtaht eht NACSROTCES desareeraskramowtehT.niagayek
ehtnehw B/R kramllabkcartehtgnicalpretfadesserpsiyek .krampihsnwono
Data
Tilt Data The tilt angle set with the TILT level is displayed in 1° steps between 0°
and 55°. When the auto tilt function is in operation, instantaneously
changing present tilt angle is indicated below it; ( ).
Range Data Shows the range scale set with the RANGE switch.
Range/Bearing Mark
Data The slant range to the range marker and the bearing of the bearing mark
is displayed.
Setting Change Data When the setting of the following switches is changed, the new setting is
noted in larger characters for about five seconds at the top of the screen.
The current tilt angle and sector range are also displayed upon switching
on the AUTO TILT switch.
Gain Data The gain set with the GAIN control is displayed in 0.5 steps between 0
and 10.
Trackball Data : Slant Range
: Horizontal Range
: Depth
: Bearing
The bearing is shown in either 360° or ± 180° indication system relative
to ship’s heading. In the latter case, "B" is indicated as follows.
BB
°
()
°
R
T
R°
B
R
°
T±
±
G
Switches
TILT
GAIN
RANGE
Display Switches
AUTO TILT SPD
AUTO SCAN WDTH
Display

.

.°
°
G
BP ------- on the port side
BS ------- on the starboard side