All other cables are connected to terminal boards. Fabricate their ends as follows.
1) Cable Armor
<For cables led in through cable clamp>
Expose the armor and clamp it with the cable clam p.
Cable Clamp
<For cables led in through cable gland>
Solder a vinyl sheath wire to the armor and con nec t it to the grounding terminal.
Bare wire
Soldering Vinyl Sheath Wire
To Earth Terminal
2) Cable Shield
<For individual shield>
Undo individual shields only near at t he terminal boards to which the wires are connected.
Further, tape shields for ins ulation.
Vinyl Sheath
Individual Shield
<For common shield>
Undo common shield at entrance of the unit and tape it for insulation.
Common
shield
Vinyl Tape