Furuno FR/FAR-2835SW/2865SW manual Table of Contents

TABLE OF CONTENTS

1. MOUNTING

1.1	Raditor Assemblig Procedure	1-2
1.2	Mounting Structures	1-4
1.3	Mounting the Scanner Unit on the Mounting Platform	1-5
1.4	Mounting the Display Unit	1-9
1.5	Mounting the Separate Type Control Panel	1-10
1.5	Power Supply Unit	1-11
1.6	Mounting the Transciver Unit	1-11

2. CONNECTIONS

2.1 Antenna Unit		2-1
2.2	Power Supply Unit (PSU-004)	2-3
2.3 Transceiver Unit		2-4
2.4	Display Unit Connections	2-8

3. INITIALIZATION AND ADJUSTMENT

3.1	Preparation for Initialization and Adjustment	.................................................................. 3-1
3.2	Heading Alignment	3-2
3.3 Adjusting Sweep Timing		3-2
3.4 Adjusting Video Signal Level		3-3
3.5	Suppressing Main Bang	3-4
3.6	Confirming Tuning	3-4
3.7	Confirming Magnetrom Heater Voltage	3-5
3.8	Initial Settings Menus	3-7
3.9	Setting the Function Keys	3-9
3.10 Menus for Initialization and Adjustment		3-12
3.11 Adjustment ARP Board		3-13
3.12 Installation Check List		3-15

4. INSTALLATION OF GYRO CONVERTER GC-8 (option)

4.1	General Procedure for Installing and Setting up the GYRO CONVERTER Board	4-1
4.2	Connection of External Power Supply	4-3
4.3	Confiming Gyrocompass Specifications	4-3
4.4 Changing Settings on the GYROCONVERTER Board		4-4
4.5	Setting the Bearing on the Radar Display	4-8

iv