SETUP NMEA/DGPS PORT 2 menu description
This menu should be set according to the specifications of the equipment connected to connectors PORT 1 (NMEA) and PORT 2 (DGPS) at the rear of the display unit. The menu can be displayed by pressing the [MENU] key followed by the soft keys CON- FIGURATION and SETUP NMEA PORT 2. For detailed information, see the installation manual.
FORMAT- WITH NEW RTCM(OUTPUT)
Selects data format of connected equipment; NMEA0183 version 1.5, version 2.0, RTVM104 (EXTRN), RTCM104 (INTRN) or RTCM104 (OUTPUT). RTCM104 (INTRN) is for "D" versions only. The default setting for
The procedure for setting LAT/LON FORMAT is similar to those for PORT 1. Note that you cannot setup data sentences when you select RTCM104 (INTRN) as the format. (A level converter
LAT/LON FORMAT (GGA only)
Selects the seconds of latitude and longitude positions in hundredths, thousandths or ten thousandths of a degree.
UPLOAD/DOWNLOAD DATA menu
This menu allows you to upload waypoint and route data to a PC or download the same data from a PC, via the DGPS connector at the back of display unit. The menu can be displayed by pressing the [MENU] key fol- lowed by the soft keys CONFIGURATION and UPLOAD/DOWNLOAD DATA. For de- tailed information, see the installation manual.
See previous pages for Memory Card info.
DWNLOAD
UPLOAD
DOWNLOAD WPT/RTE TO PC
UPLOAD WPT/RTE FROM PC
SAVE DATA TO MEMORY CARD
LOAD DATA FROM MEMORY CARD
DGPS 3D |
| RETURN |
|
|
|
upload/download menu
Display unit, rear view
Set communication software on the PC as follows:
Baud Rate: | 4800 bps |
Character Length: | 8 bit |
Stop bit: | 1 bit |
Parity: | None |
X Control: | XON/XOFF |
The following data can be downloaded/up- loaded between a personal computer and this equipment.
•Waypoint data (In alphanumeric order)
•Route data (In order of route number)
•End of sentence
Note 1: There are two kinds of data for route
data: route data and route comment data.
Note 2: DGPS position fix is not available when uploading or downloading data.
12
