3 Changing Mark Size
Mark size can be selected from STD (stan- dard) and SMALL.
1. Press the [MENU] key to display the main menu.
2. Press the soft key CHART SETUP OP-
TIONS.
3. Press the soft key CHART DETAIL to open the CHART DETAIL menu.
|
| CHART | |
sLAT/LON GRID | GREEN | DETAIL | |
TEXT INFO | ON | EDIT | |
WAYPOINT | LARGE | ||
WAYPOINT NAME | ON | CNTOUR | |
INDEX | ON | ||
LINE | |||
LANDMASS | BRT YELLOW | ||
| |||
BACKGROUND | BLUE |
| |
NAV AIDS | ON |
| |
SECTOR INFO | OFF |
| |
OTHER SYMBOLS | WHITE |
| |
MARK SIZE | STD |
| |
|
| RETURN |
DGPS 3D
CHART DETAIL menu
4.Press ▼ to select MARK SIZE.
5Press the soft key EDIT.
6.Press ▲ or ▼ to select STD (standard) or
SMALL.
7.Press the [ENTER] key.
4 Erasing Marks
Erasing individual marks/lines
1.Operate the cursor pad to place the cur- sor on the mark you want to erase.
2.Press the [CLEAR] key. The mark se- lected is erased.
Note: To erase a line, place the cursor on the edge of the line. The line segment will be erased.
Erasing whole marks/lines
You can erase all marks and lines. Be abso- lutely sure you want to erase all marks and lines; erased marks and lines cannot be re- stored.
1.Press the [MENU] key followed by the soft keys CHART SETUP OPTIONS and
TRACK CONTROL.
2.Press the soft key ERASE MARK. You are asked if you are sure to erase all marks and lines.
3.Press the [ENTER] key to erase, or press the [CLEAR] key to escape.
5Displaying Track and Mark Points
Number of track and mark points used ap- pears in the TRACK STATUS window on the TRACK CONTROL display. For further de- tails see TRACK CONTROL WINDOW.
7
