1.OPERATION
5.Use the cursor pad to select “A” and then press the [ENT] key. The data available for display is shown.
NONE TEMP
DEPTH
SOG
STW
HDG
COG
XTE
WIND TIMER
ODO POWER
TRIP CUR
POSN PRE
TD
TIME HUM
WPT NONE
ROT ETA
Digital display options
6.Select data desired and then press the [ENT] key. (All data require appropriate sensors.)
NONE: | No display |
TEMP: | Water temperature |
DEPTH: | Depth |
SOG: | Speed over ground |
STW: | Speed through water |
HDG: | Heading |
COG: | Course over ground |
XTE: | |
WIND: | Wind speed and direction |
ODO: | Odometer |
TRIP: | Trip distance |
CUR: | Current (tide) |
POSN: | Position in latitude and longitude |
TD: | Position in Loran C or Decca TDs |
TIME: | Date and time |
WPT: | Waypoint (selected at navigator) |
ROT: | Rate of turn |
TIMER: | Remaining time for time alarm |
POWER: Power source voltage | |
CUR: | Current (tide) speed and direction |
PRE: | Atmospheric pressure |
HUM: | Humidity (relative or absolute) |
ETA: | Estimated Time of Arrival (at destination waypoint) |
7.For
Note 1: A digital display shows bars
Note 2: ETA display requires the sentences ZDA and ZTG or ZTG and RMC.
8.Press the [MENU] key twice to close the menu.
1.5.3Setting up graph displays
1.Select GRAPH referring to paragraph 1.5.1.
2.Press the [ENT] key to show the graph display options window.