Fusion EN-3001, EN-3004, En-1502 manual English Amplifier Specifications, RMS Power Ratings

ENGLISH

AMPLIFIER SPECIFICATIONS

	EN-3004 (4 Channel)	EN-1502 (2 Channel)
Class	Class-AB	Class-AB
Power	1800 Watts	1000 Watts
Frequency Response	20Hz - 20kHz	20Hz - 20kHz
Dimensions	336mm (13-1/4”) x 200mm (7-	256mm (10-1/16”) x 200mm (7-
	7/8”) x 51mm (2”)	7/8”) x 51mm (2”)
RMS Power Ratings	60 Watts x 4 @ 4 Ohms 1% THD+N	60 Watts x 2 @ 4 Ohms 1% THD+N
	75 Watts x 4 @ 2 Ohms 1% THD+N	75 Watts x 2 @ 2 Ohms 1% THD+N
	150 Watts x 2 @ 4 Ohms Bridged	150 Watts x 1 @ 4 Ohms Bridged
	1% THD+N	1% THD+N
Signal to Noise Ratio	>50 dB	>50 dB
High and Low Pass	12dB per Octave	12dB per Octave
Crossover
Crossover Range	50Hz – 250Hz	50Hz – 250Hz
Low Level Input Range	0.35 Volts to 10 Volts	0.35 Volts to 10 Volts
High Level Input Range	1 Volt to 30 Volts	1 Volt to 30 Volts
Minimum load	2 Ohm stereo and 4 Ohm bridged	2 Ohm stereo and 4 Ohm bridged
impedance

	EN-3001 (Monoblock)
Class	Class-AB
Power	1200 Watts
Frequency Response	20Hz - 400Hz
Dimensions	336mm (13-1/4”) x 200mm (7-
	7/8”) x 51mm (2”)
RMS Power Ratings	200W x 1 @ 4 Ohms 1% THD
	300W x 1 @ 2 Ohms 1% THD
Signal to Noise Ratio	>50 dB
High and Low Pass	12dB per Octave
Crossover
Subsonic Filter	12dB per Octave
Low Pass Crossover	50Hz – 400Hz
Range
Subsonic Crossover	10Hz – 40Hz
Range
Bass Boost @ 45Hz	0 to +18dB
Low Level Input Range	0.35 Volts to 10 Volts
High Level Input Range	1 Volt to 30 Volts
Minimum load	2 Ohm
impedance

	General
Power	+12 V DC (negative
Requirements	ground)
Operating Voltage	10.5 – 16V
Minimum	8 Gauge (AWG)
Recommended-
Power/Ground
Cable Size
Recommended	8 Gauge Cable - 40A
inline fuse size	4 Gauge Cable - 80A

NOTE: ENCOUNTER AMPLIFIER SERIES HAVE A MINIMUM LOAD IMPEDANCE OF

2 OHM PER CHANNEL

4 OHM BRIDGED

Version 2.1

2