ADDING AND REMOVING PRESETS
The RA50 allows you to set up your favorite AM/FM stations as presets for easy recall. Note: Up to 15 presets can be stored for each radio band.
When you are using the tuner, the Play / Pause, Forward, Backward, and Menu keys provide special options to allow you to work with preset frequencies (AM/FM).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Encoder | Menu key | Play / Pause | Forward | Backward | ||||
|
|
|
|
|
|
|
|
|
To add a new preset:
Do one of the following.
1.Tune the RA50 to the required frequency.
2.Press and hold down the Play / Pause key. The message: “Preset saved” is displayed briefly.
or
1.Press the Menu key.
2.Turn and then press the Encoder to select Presets > Save current. The message: “Preset saved” is displayed briefly.
Note: New presets must be unique. If you try to create a preset for the same frequency as an existing one, the unit displays the message “Previously saved”.
To remove one or more presets:
1.Press the Menu key.
2.Turn and then press the Encoder to select Presets > Remove preset.
3.Do one of the following (there is no warning or confirmation prompt before deletion):
•Select Remove all presets and press the Encoder to remove all current presets. The message: “Presets removed” is displayed briefly.
•Select a preset and press the Encoder to remove the selected preset. The selected preset is removed from the list.
4.Press the Menu key (or leave to time out) to exit.
RA50 CABLE CONNECTION DIAGRAM
Figure 8 – RA50 cable connection diagram
12 | 21 |
