Installation instructions

The following installation instructions describe the installation steps for various appliance types.

Therefore the diagrams may be a general representation of your appliance.

Particular reference is made to special installation steps for individual appliance types..

1.Check the installation niche

ãCAUTION

Use the following check list for a safe and trouble free installation.

1.Check the floor.

See section on “Installing the appliance/Floor”.

2.Check the dimensions of the installation niche, see “Dimensions of the installation niche”.

3.Check that the installation niche is square.

4.Check location of the socket.

See section on “Electrical connection” and in the section on “Dimensions of the installation niche”.

5.Check location of the water connection (only for appliances with ice maker).

See section on “Water connection” and in the section on “Dimensions of the installation niche”.

6.Check attachment of the adjacent cabinet/fixtures. All cabinet parts in the vicinity of the appliance must be connected securely to the wall.

7.Check that adjacent cabinet/fixtures have adequate clearance (door opening angle).

2.Removing the packaging

ãWARNING

Risk of personal injury and damage to the appliance!

The appliance could tilt over when unpacking.

The appliance could tilt over when the appliance door is opened.

The appliance is very heavy.

Data relating to the weight when empty is found in the following table:

Appliance width

Weight (empty)

 

 

Fridge-Freezer combination

440 lbs (198 kg)

30" (75.6 cm)

 

 

 

Fridge-Freezer combination

558 lbs (251 kg)

36" (90.3 cm)

 

 

 

Note:

Check appliance for damage in transit.

Do not install the appliance if it is visibly damaged. If in doubt, contact your dealer.

To avoid floor damage:

1.Remove the packaging carton and be careful not to damage the surface of appliance.

2.Place packaging cardboard or plywood under the appliance.

3.Remove accessories from the outside of the appliance.

Save adhesive tape which was used to attach the supplied accessories to the appliance.

It can be used subsequently for attaching an edge protection to the installation niche walls (see section on “A / 3. Attaching the edge protectors”).

4.Remove transportation protection devices (a) and lift appliance off the pallet – appliance is very heavy!

5.Carefully open the appliance – risk of tipping over – and remove accessories and installation materials from inside the appliance. Close the door again.

Note:

Do not remove transportation safety devices which protect the shelves and storage compartments inside the appliance until the installation is complete, otherwise the parts may be damaged.

12

Page 12
Image 12
Gaggenau RB 472, RB 492 Installation instructions, Check the installation niche, Removing the packaging

RB 492, RB 472 specifications

Gaggenau, a name synonymous with luxury kitchen appliances, offers a range of built-in refrigerators that highlight cutting-edge technology and exceptional design. Among its premium offerings are the RB 472 and RB 492 models, both of which epitomize the brand's commitment to quality and performance.

One of the standout features of the Gaggenau RB 472 and RB 492 is their precise temperature control system. These models employ advanced cooling technology that maintains optimal temperatures throughout the fridge, ensuring food stays fresh longer. The dynamic cooling system circulates air evenly, eliminating hot spots and keeping your perishables, from fruits to meats, at their best.

Gaggenau has designed these refrigerators with an eye towards efficiency as well. Both the RB 472 and RB 492 are equipped with energy-efficient compressors that reduce power consumption without compromising performance. This eco-friendly approach not only contributes to lower energy bills but also aligns with Gaggenau’s commitment to sustainability.

Another key characteristic is the user-friendly interface. Both models feature intuitive controls that allow users to easily adjust settings and monitor internal conditions. Whether you’re changing the temperature or activating the holiday mode to maximize storage space, responsiveness and ease of use are guaranteed.

Storage solutions are exceptionally versatile in these models. The RB 472 and RB 492 come with adjustable glass shelves that can be reconfigured to accommodate various items, from large platters to wine bottles. Additionally, the full-length drawers are optimized for storing fruits and vegetables, each with its own humidity control feature to prolong freshness.

The elegant design of Gaggenau’s refrigerators is another defining characteristic. With sleek stainless-steel finishes and integrated handles, these models blend seamlessly into luxury kitchens. Their minimalist aesthetic is complemented by precise engineering, ensuring quiet operation and minimal vibration.

In summary, the Gaggenau RB 472 and RB 492 are premium built-in refrigerators that combine advanced technology, energy efficiency, and stylish design. Their precise temperature control, flexible storage options, user-friendly interface, and environmental consciousness make them ideal choices for those who value quality and performance in their kitchen appliances. With Gaggenau, you are not just investing in a refrigerator; you are enhancing the overall culinary experience.