Aligning the appliance

To ensure that the appliance functions correctly, it must be set level with a spirit level.

If the appliance is not level, water may flow out of the ice maker, ice cubes may be irregular or the doors may not close properly.

Electrical connection

ãWARNING

Avoid the risk of an electric shock!

Insert into a grounded 3-phase socket.

Never remove grounding phase. Do not use any adapters. Do not use any extension cables.

Non-compliance with these instructions may result in death, fire or an electric shock. Improper connection of the protective conductor may result in an electric shock. If you are in doubt whether the appliance has been grounded properly, have the appliance tested by a qualified electrician or service technician.

The socket must be near the appliance and also freely accessible following installation of the appliance.

The appliance complies with protection class I. Connect the appliance to 115 V/60 Hz alternating current via a correctly installed socket with protective conductor. The socket must be fused with a 10 to 16 A fuse.

The appliance comes with a UL registered 3-wire power cord. The appliance requires a 3-pole socket. Please observe the following table with regard to this:

Appliance

Maximum simultaneous

 

load

 

 

Fridge-Freezer combination

6.0 amps

30" (75.6 cm)

 

 

 

Fridge-Freezer combination

6.0 amps

36" (90.3 cm)

 

Check on the rating plate whether the indicated voltage and current type correspond with the values of your power supply. The location of the rating plate can be found in the chapter entitled Customer service.

ãWARNING

Never connect the appliance to electronic energy saver plugs. Our appliances can be used with mains and sine-controlled inverters. Mains- controlled inverters are used for photovoltaic systems which are connected directly to the national grid. Sine-controlled inverters must be used for isolated applications (e.g. on ships or in mountain lodges) which are not connected directly to the national grid.

Water connection

ãCAUTION

Connect the appliance to a drinking water line.

The water may be connected only by a competent fitter according to the local regulations of the appropriate water supply company.

A cold water connection is necessary for operating the automatic ice maker. The water pressure must be between 25 and 120 p.s.i. (1,72 and 8,25 bar).

The installation must correspond to the local plumbing regulations.

A separate shut-off valve should be installed in the cold- water inflow. The shut-off valve should not be located behind the appliance. It is recommended that you mount the shut-off valve directly next to the appliance or at another place which is easily accessible. When installing the water connection, pay attention to the permissible installation area for the water mains.

For connection to the drinking water mains use only water pipes which are suitable for drinking water. Observe national regulations and the connection conditions of the local water supply companies.

When installing the water connection, observe the permitted installation areas for the pipe. For the permitted installation areas and dimensions see “Dimensions of the installation niche”.

The maximum outside diameter of the water mains (without connecting pieces) is 3/8" (9.5 mm).

9

Page 9
Image 9
Gaggenau RB 492 Electrical connection, Water connection, Aligning the appliance, Appliance Maximum simultaneous Load

RB 492, RB 472 specifications

Gaggenau, a name synonymous with luxury kitchen appliances, offers a range of built-in refrigerators that highlight cutting-edge technology and exceptional design. Among its premium offerings are the RB 472 and RB 492 models, both of which epitomize the brand's commitment to quality and performance.

One of the standout features of the Gaggenau RB 472 and RB 492 is their precise temperature control system. These models employ advanced cooling technology that maintains optimal temperatures throughout the fridge, ensuring food stays fresh longer. The dynamic cooling system circulates air evenly, eliminating hot spots and keeping your perishables, from fruits to meats, at their best.

Gaggenau has designed these refrigerators with an eye towards efficiency as well. Both the RB 472 and RB 492 are equipped with energy-efficient compressors that reduce power consumption without compromising performance. This eco-friendly approach not only contributes to lower energy bills but also aligns with Gaggenau’s commitment to sustainability.

Another key characteristic is the user-friendly interface. Both models feature intuitive controls that allow users to easily adjust settings and monitor internal conditions. Whether you’re changing the temperature or activating the holiday mode to maximize storage space, responsiveness and ease of use are guaranteed.

Storage solutions are exceptionally versatile in these models. The RB 472 and RB 492 come with adjustable glass shelves that can be reconfigured to accommodate various items, from large platters to wine bottles. Additionally, the full-length drawers are optimized for storing fruits and vegetables, each with its own humidity control feature to prolong freshness.

The elegant design of Gaggenau’s refrigerators is another defining characteristic. With sleek stainless-steel finishes and integrated handles, these models blend seamlessly into luxury kitchens. Their minimalist aesthetic is complemented by precise engineering, ensuring quiet operation and minimal vibration.

In summary, the Gaggenau RB 472 and RB 492 are premium built-in refrigerators that combine advanced technology, energy efficiency, and stylish design. Their precise temperature control, flexible storage options, user-friendly interface, and environmental consciousness make them ideal choices for those who value quality and performance in their kitchen appliances. With Gaggenau, you are not just investing in a refrigerator; you are enhancing the overall culinary experience.