8. Installation
Technical Data
Total connected load: 4400 W
AC
Important notes on installation
This appliance can be combined with all Gaggenau Vario 400 Series appliances.
This appliance may be installed in kitchen combinations made of wood or similar combustible materials without taking additional safety measures. The
The appliance must only be connected by an authorised specialist, paying attention to the relevant regulations of the power supply companies and the regional construction regulations.
Pay attention to the data on the rating plate. The appliance must be properly grounded.
When connecting electrical appliances in the proximity of cooking surfaces, make sure that connecting cables do not come into contact with hot cooking surfaces.
The installation technician is responsible for the correct functioning of the appliance at the place of installation. He must instruct the user on how to disconnect the appliance from electricity in an emergency.
After unpacking, check the appliance for any transportation damage and report this immediately to the transportation company.
There must be a gap of at least 20mm(13/16 ´) at the side between the appliance and any walls or furnishings.
If all poles of the appliances cannot be isolated from the mains by removing an accessible plug, an isolating device with a contact gap of at least 3 mm must be installed (e.g. domestic fuse).
No warranty claims can be lodged for any damage resulting from failure to observe these instructions. Pay attention to the “Important notes" on page 3 and 4.
Subject to technical change without notice.
15
