Installing the cooktop
•Firmly plug the connecting cable in the cooktop and in the control panel (the plugs must lock into place).
•Turn the clamping screws to the side. Insert the hob with the control panel on the front into the
Note: do not stick the hob onto the worktop with silicone.
•Turn the clamping screws under the countertop and tighten them evenly. Do not tighten the clamping screws too tightly, as a uniform sealing gap should be left all round.
•Connect the appliance to the electricity. Test that it functions correctly. If the luminous discs behind both control knobs blink alternately, check the connecting cable between the appliance and the control panel is firmly plugged in.
20 | 9000030301 en 12.04 EB |
