Fujitsu Siemens Computers N6210 manual Information Menu - Viewing Current System Parameters

I n f o r m a t i o n M e n u

INFORMATION MENU – VIEWING CURRENT SYSTEM PARAMETERS

The Information Menu allows you to view the current system parameters. This is the default screen, and cannot be changed directly.

The following tables show the names of the menu fields for the Information menu. This screen reflects the current system settings.

	Insyde Software SCU							2005/06/21			5:05:34 PM
Main			Advance	Security		Boot Exit
		System							CPU
		Primary Master:			HITACHI_DK23FA_60				Intel(R) Pentium(R)		M 750
		Primary Slave:			HL-DT-ST DVDRAM GMA-4080				Speed:	1.86 GHz
		BIOS Version:			x.xx				L1 Cache:		64 KB
									L2 Cache:		2048 KB
		BIOS Date:			xx/xx/xx
		BIOS Area:			E000h - FFFFh
		Supervisor Password Is:					Clear		Memory
		User Password Is:					Clear
		Primary Master Password Is:					Clear		Total:	512 MB
									Slot 1:	256 MB DDR2
		Owner Information Is :					Clear		Slot 2:	256 MB DDR2
		Asset Number :			None

Configures startup conditions (fast boot, password. etc)

Figure 1. Information Menu

Table 1: Fields, Options and Defaults for the Information Menu

Note that the parameters shown in the figure may vary depending upon your system’s configuration.

Block Name			Field Name			Description
System	■	Primary Master:		■	Supervisor Password Is:	The System block contains information about the sys-
	■	Primary Slave:		■	User Password Is:	tem setup, including current password statuses,
	■	BIOS Version:		■	Primary Master Password Is:	installed drives, BIOS version and location, and owner
	■	BIOS Date:		■	Owner Information Is:	information. For information on changing this informa-
	■	BIOS Area:		■	Asset Number:	tion, see the appropriate section of this manual.
CPU	■	Processor Name		■	L1 Cache:	The CPU block provides information about the type and
	■	Speed:		■	L2 Cache:	speed of the processor, and the size of the cache(s).
Memory	Total:					The Memory block displays the size and location of the
	Slot 1:					currently installed memory.
	Slot 2:

3