Fujitsu Siemens Computers N6210 Exit Menu Leaving the Setup Utility, Exit No Save, T00 Default

L i f e B o o k N S e r i e s N o t e b o o k B I O S

EXIT MENU – LEAVING THE SETUP UTILITY

The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through The Setup Utility on page 2 for more information.)

The following table shows the names of the menu fields for the Exit menu and a description of the field's func- tion and any special information needed to help under- stand the field's use.

		Exit
		Save and Exit
		Exit (No Save)			CPU
		T00 Default		Settings	Intel(R)
		RAM UJRestore-831S		Settings	Speed:
					L1 Cache
			Figure 20. Exit Menu
Table 20: Fields, Options and Defaults for the Exit Menu
Menu Field	Description
Save and Exit	Save and Exit will store all the entries on every menu of the setup utility to the BIOS memory and then exit the setup
	utility. A confirmation message asking if you want to save the current parameters will be displayed. Click [OK] to save
	and exit, or [Cancel] to close the Save and Exit window.
Exit (No Save)	Exit (No Save) will exit the setup utility without savings any changes you may have made. A confirmation message ask-
	ing if you want to exit will be displayed. Click [OK] to exit, or [Cancel] to close the Exit (No Save) window.
Default Settings	Selecting Default Settings will display a message asking if you want to load the default settings. When confirmed the
	setup utility will return to the Information Menu.
Restore	Selecting Restore Settings will load the previous values in BIOS memory for all menu fields. A message asking if you
Settings	want to load original custom settings will be displayed. When confirmed the setup utility will return to the Exit menu.

20