Fujitsu Siemens Computers N6210 Security Menu - Setting The Security Features, write protection

S e c u r i t y M e n u

SECURITY MENU – SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to view the current security configuration. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through The Setup Utility on page 2 for more information.)

The following tables show the names of the menu fields for the Security menu and its submenus, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. The default condition is no passwords required and no

write protection.

If you set a password, write it down and keep it in a safe place. If you forget the password you will have to contact your support representative to regain access to your secured functions and data.

■

■

■

Entering a password incorrectly 3 times in a row will cause the keyboard and mouse to be locked out, the warning [System Disabled] will be dis- played, and a loud beeping will occur. If this happens restart the computer by turning off and on the power with the power switch and use the correct pass- word on reboot.

If you make an error when re-entering the password a [Warning] will be dis- played on the screen. To try again press the Enter key and then retype the pass- word. Press the Esc key to abort the password setting process.

If the Power Management Security is Enabled and the Password on Boot is Disabled you will not have to type your password upon resuming the system from the Suspend or Save-to-Disk modes. Power Management Security will work only if Password boot is enabled.

Insyde Software SCU	2005/06/21	5:05:30 PM
Main Advance Security Boot	Exit

System		Set Supervisor Password			CPU
		Set User Password
Primary Master Minimum: FUJITSUUserMHT2100ATPassword Length					Intel(R) Pentium(R)		M 750
Primary Sl	_	Password on Boot			Speed:		1.86 GHz
					1 Cache:		64 KB
	_	On Automatic Wake Up
BIOS Version :		x.xx			2 Cache:		2048 KB
BIOS Date :	_	KB Lock on Resume
		xx/xx/xx
BIOS Area :		Boot from Removable Media
		E000h - FFFFh
		Flash Write			Memory
Supervisor Password Is :				Clear
User Password Is :			Hard Disk Security
				Clear
			Owner Information		Total :	512 MB
Primary Master Password Is :Clear
					Slot 1 :	256 MB DDR2
Owner Information Is :				Clear	Slot 2 :	256 MB DDR2
Asset Number :		None

Press <Enter> Key to set Supervisor Password to enable any Password Features. Then Password Entry is required to enter BIOS Setup.

Figure 13. Security Menu

13