Network Setting
Connection Setting
Wired network Setting
[HOME]
Navigation button and [OK]
[RETURN]
By connecting the unit to a broadband home network, you have access to services such Home Link and NetCast
·Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference.
·Before setting the wired network, you need to connect the broadband internet to your home network.
Choose [Network] → [Connection setting] and press [OK]
1) Dynamic Mode
1
Select [Wired] and press [OK].
2
Select IP mode [Dynamic] and press [OK]. » Press [OK] to complete the network
connection.
2) Static Mode
1
2
Select [Wired] and press [OK].
Select IP mode [Static] and press [OK]. Set [IP Address], [Subnet Mask], [Gateway]
and [DNS Server].
<<: Move to previous block. >> : Move to next block.
» Press [OK] to complete the network connection.
Press [HOME] or [RETURN] to exit menu or cancel the selection.
Note
If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using < / > / ∧ / ∨ buttons.
LG Multimedia Player User’s Manual | 30 |