Dual Trunk E1 Router

Table D-7

Menu-0H SLA Configuration

 

 

Parameter

Description

 

 

 

 

DDR Threshold

Set this threshold between 0% and 100%. 0% means that this feature is disabled.

 

Configurable to one thousandth of a percent (for example, 99.999%). When the DDR

 

falls below this threshold:

 

• An event is sent to the Event Log

 

• A trap will be sent to the NMS (if configured)

 

• An alarm message will be displayed on the Terminal User Interface

 

• A DDR threshold violation is counted0%

 

Default: 0%

 

 

 

Delay Period

Set the Delay Period between 1 minute and 255 minutes. This figure represents the

 

time interval between delay measurements on each PVC.

 

Default: 1

 

 

 

Delay Packet Size

Set the Delay Packet Size between 50 bytes and 1500 bytes. This figure represents the

 

size of Request and REsponse packets used to measure delay.

 

Default: 128

 

 

 

Table D-8

Main-1 Status

 

 

 

Parameter

 

Description

 

 

 

 

 

Unit status

 

Indicates the Dual Trunk E1 Router is operating normally, or if any special

 

 

 

conditions exist.

 

 

 

 

Network status

 

Displays information on the condition of the received T1 or E1 signal.

 

 

 

 

Ethernet status

 

Indicates if the Ethernet link is up or down.

 

 

 

 

Link1/Link 2 status

 

Indicates the status, up or down, of the network link 1(NET1) and network

 

 

link 2 (NET2).

 

 

 

Table D-9

Menu-1 Unit Status (1 of 2)

 

 

 

Indication

 

Description

 

 

 

 

 

Normal

 

No abnormal conditions exist.

 

 

 

 

Self Test

 

Unit is running self test.

 

 

 

 

Net Lpbk (port)

 

Unit is in network loopback.

 

 

 

 

PLD Lpbk (port, fraction)

 

Unit is in payload loopback.

Send User 1 (port, fraction) port = Net1 or Net2

Unit is sending User 1 pattern.

Send User 2 (port, fraction)

Unit is sending User 2 pattern.

 

 

 

 

Send 1:1 (port, fraction)

Unit is sending alternate 1s and 0s.

 

 

 

 

Send 1:2 (port, fraction)

Unit is sending standard loopdown remote code continuously.

 

 

 

 

Send 1:4 (port, fraction)

Unit is sending standard loopup remote code continuously.

 

 

 

 

Send 1:7 (port, fraction)

Unit is sending 1:7 pattern.

 

 

 

 

Send 3:24 (port, fraction)

Unit is sending 3:24 pattern.

 

 

 

 

Dual Trunk E1 Router User’s Guide

TECHNICAL: 0118 931 2233

117

Page 129
Image 129
Black Box LRU4240 manual Indication Description, Default 0%, Technical 0118 931 117