Black Box LRU4240 manual RIP Command Reference, Router rip, Debug rip

Dual Trunk E1 Router

RIP COMMAND REFERENCE

configure terminal

Use the configure terminal command to change to configure terminal mode.

Command Syntax: configure terminal

Command Mode: Enable

Usage

There are no arguments or keywords for this command. The prompt will change to

Rip(config)#

Example

Rip(enable)#configure terminal

Rip(config)#

router rip

Use the router rip command to change to configure router mode.

Command Syntax

router rip

Usage

There are no arguments or keywords for this command. The prompt will change to

Rip(router rip)#

Example

Rip(config)#router rip

Rip(rip)#

interface IFNAME

Use the interface IFNAME command to change from configure terminal mode to configure interface mode. Command Syntax: interface net1 net2 mlppp e0

Command Mode:: Config

Usage

The argument to this command is one of the router interface e0 for ethernet port, net1 for PPP1, net2 for PPP2, or mlppp for

MLPPP

Example

Rip(config)#interface net1

Rip(net1)#

quit

Use the quit command to change exit from the current mode and return to the higher level mode.

Command Syntax: quit

Example

Rip(config)#quit

Rip(enable)#

debug rip

Use the debug rip command to specify the options for the displayed debugging information for RIP events. Use the no parameter to disable all debugging.

Command Syntax

debug rip (eventszebospacket)

events - RIP events debug information is displayed. zebos - RIP and ZebOS communication is displayed

packet - packet (recvsend (detail)) Specifies RIP packets only debug rip packet

recv - specifies that information for received packets be displayed.

Dual Trunk E1 Router User’s Guide TECHNICAL: 0118 96 56 000 155