Dual Trunk E1 Router

router rip

Use the router rip global command to enable a RIP routing process. Use the no form of the command to disable the RIP routing process. (no) router rip

Command Syntax

There are no arguments or keywords for this command. Command Mode: Router Configuration

Examples router rip Usage Notes router rip version 1

network 10.10.10.0/24 network 10.10.11.0/24 neighbor 10.10.10.10

show debugging rip

Use the show debugging rip command to display the RIP debugging status for these debugging options: zebos debugging, RIP event debugging, RIP packet debugging and RIP zebos debugging.

Command Syntax show debugging rip Command Mode: Enable

There are no arguments or keywords for this command. Examples

show debugging rip

show ip protocols

Use the show ip protocols command to display RIP process parameters and statistics.

Command Syntax show ip protocols Command Mode: Enable

There are no arguments or keywords for this command. Examples

show ip protocols RIP(enable)#show ip protocols

116:Routing Protocol is "rip"

117:Sending updates every 30 seconds with +/-50%, next due in 14 seconds

118:Timeout after 180 seconds, garbage collect after 120 seconds

119:Outgoing update filter list for all interface is not set

120:Incoming update filter list for all interface is not set

121:Default redistribution metric is 1

122:Redistributing: connected

123:Default version control: send version 2, receive version 2

124:

Interface

Send Recv Key-chain

125:

net2

2

2

126:Routing for Networks:

127:net1

128:net2

129:Routing Information Sources:

130:

Gateway

BadPackets BadRoutes

Distance Last Update

 

131:

60.10.2.1

0

0

120

00:15:22

 

132: Distance: (default is 120)

 

 

 

 

Dual Trunk E1 Router User’s Guide

 

 

TECHNICAL: 0118 96 56 000

159

Page 171
Image 171
Black Box LRU4240 manual Show debugging rip, Command Syntax show debugging rip Command Mode Enable, Show ip protocols