Black Box LRU4240 Show debugging ospf, Command Mode Priviledged Exec mode Usage, Show ip ospf

Dual Trunk E1 Router

ospfd# configure terminal ospfd(config)# route-map rmap1 permit 3 ospfd(config-route-map)# set tag 6

Related Commands

show debugging ospf

Use the show debugging ospf command to display the set OSPF debugging option.

Command Syntax

show debugging ospf

Command Mode Priviledged Exec mode

Usage

This is a sample output from the show debugging ospf command. Some lines in this output wrap around, they might not wrap around in the actual display.

ospfd# show debugging ospf OSPF debugging status:

OSPF packet Link State Update debugging is on OSPF all events debugging is on

ospfd# te mo

ospfd# 2002/05/09 14:08:11 OSPF: RECV[LS-Upd]: From 10.10.10.70 via eth0:10.10.10.50(10.10.10.10 -> 224.0.0.5)

2002/05/09 14:08:11 OSPF: LSA[10.10.10.10:10.10.10.70]: instance(0x8139cd0) created withLink State Update

2002/05/09 14:08:11 OSPF: RECV[LS-Upd]: From 10.10.10.70 via eth0:10.10.10.50 (10.10.10.10-> 224.0.0.5)

2002/05/09 14:08:11 OSPF: LSA[10.10.10.70:10.10.10.70]: instance(0x813c688) created withLink State Update

2002/05/09 14:08:52 OSPF: RECV[LS-Upd]: From 10.10.10.70 via eth0:10.10.10.50 (10.10.10.10-> 224.0.0.5)

2002/05/09 14:08:52 OSPF: LSA[20.2.2.0:10.10.10.70]: instance(0x813a8e8) created with LinkState Update

2002/05/09 14:08:52 OSPF: LSA[40.2.2.0:10.10.10.70]: instance(0x8138be0) created with LinkState Update

2002/05/09 14:11:12 OSPF: RECV[LS-Upd]: From 10.10.10.70 via eth0:10.10.10.50 (10.10.10.10-> 224.0.0.5)

2002/05/09 14:11:12 OSPF: LSA[10.10.11.0:10.10.10.70]: instance(0x813c410) created withLink State Update

2002/05/09 14:12:33 OSPF: SEND[LS-Upd]: Begin send queue

2002/05/09 14:12:33 OSPF: SEND[LS-Upd]: # of LSAs 1, destination 224.0.0.5

2002/05/09 14:12:33 OSPF: SEND[LS-Upd]: End send queue

2002/05/09 14:12:33 OSPF: SEND[LS-Upd]: To 224.0.0.5 via eth0:10.10.10.50.

Examples

ospfd# show debugging ospf

Related Commands

show ip ospf

Use the show ip ospf command to display general information about all OSPF routing processes. Include the processID parameter with this command to display information about specified instances.

Command Syntax show ip ospf

show ip ospf PROCESSID

PROCESSID = <0-65535> The ID of the router process for which information will be displayed. If this parameter is included, only the information for the specified routing process is displayed.

Command Mode Priviledged Exec mode

Usage

The following are sample outputs from the show ip ospf command with and without the process ID parameter. Notice that the first output (without process ID), shows information about both instances and the second and third outputs show information only about the instances specified by the process ID.

ospfd# show ip ospf

OSPF Routing Process 1, Router ID: 10.10.11.60 Supports only single TOS (TOS0) routes

This implementation conforms to RFC2328 RFC1583Compatibility flag is disabled Opaque-LSA capability is on

SPF schedule delay 5 secs, Hold time between two SPFs 10 secs Refresh timer 10 secs

Number of external LSA 0

Number of non-default external LSA 0

Dual Trunk E1 Router User’s Guide TECHNICAL: 0118 96 56 000 187