Black Box LRU4240 manual Configure terminal, Quit, Show running-config, Show unit id

Dual Trunk E1 Router

configure terminal

Use the configure terminal command to change to configure terminal mode.

Command Syntax: configure terminal

Command Mode: Enable

Usage

There are no arguments or keywords for this command. The prompt will change to

Unit(config)#

Example

Unit(enable)#configure terminal

Unit(config)#

quit

Use the quit command to change exit from the current mode and return to the higher level mode.

Command Syntax: quit

Example

Unit(config)#quit

Unit(enable)#

show running-config

Use the show running-configcommand to show running config.

Command Syntax show running-configCommand Mode: unit

There are no arguments or keywords for this command.

Examples

Unit(enable)#show running-config show running-config

Use the show running-config command to show running config. Command Syntax

show running-config Command Mode: rip

There are no arguments or keywords for this command. Examples

Rip(enable)#show running-config

43:Current configuration:

44:!

45:!

46:!traffic configuration

47:traffic type ppp

48:multilink no

49:traffic monitoring disabled

50:ip route mode routing

51:!

52:!unit configuration

53:unit protect-mode disabled

54:unit yellow-alarm disabled

55:unit clock primary net1

56:unit clock secondary int

57:unit remote-comm none

58:unit ansi-fdl enabled

59:unit monitor-jack net1

60:!

61:!net configuration

62:t1 framing net1 esf

63:t1 lbo net1 0db

....

show unit id

Use the show unit id command to show the 6 characters local unit identifier.

Command Syntax show unit id Command Mode: unit

142 SALES: 0870 90 10 750 Dual Trunk E1 Router User’s Guide