Black Box LRU4240 manual Show ip ospf route, Command Syntax show ip ospf route

Dual Trunk E1 Router

10.10.11.511 Full/DR 00:00:38 10.10.11.10 hme1:10.10.11.50 0 0 0

ospfd#

ospfd# show ip ospf neighbor detail

Neighbor 10.10.11.51, interface address 10.10.10.10 In the area 0.0.0.0 via interface hme0

Neighbor priority is 1, State is Full, 6 state changes DR is 10.10.10.10, BDR is 10.10.10.50

Options 66 *O----E- Dead timer due in 00:00:32 Database Summary List 0 Link State Request List 0 Link State Retransmission List 0 Thread Inactivity Timer on

Thread Database Description Retransmision off Thread Link State Request Retransmission off Thread Link State Update Retransmission on

Neighbor 10.10.11.51, interface address 10.10.11.10 In the area 0.0.0.0 via interface hme1

Neighbor priority is 1, State is Full, 6 state changes DR is 10.10.11.10, BDR is 10.10.11.50

Options 66 *O----E- Dead timer due in 00:00:32 Database Summary List 0 Link State Request List 0

Link State Retransmission List 0 Thread Inactivity Timer on

Thread Database Description Retransmision off Thread Link State Request Retransmission off Thread Link State Update Retransmission on

Neighbor 10.10.11.51, interface address 10.10.11.10 In the area 0.0.0.0 via interface hme1

Neighbor priority is 1, State is Full, 6 state changes DR is 10.10.11.10, BDR is 10.10.11.50

Options 66 *O----E- Dead timer due in 00:00:32 Database Summary List 0 Link State Request List 0 Link State Retransmission List 0 Thread Inactivity Timer on

Thread Database Description Retransmision off Thread Link State Request Retransmission off Thread Link State Update Retransmission on

Examples

ospfd# show ip ospf neighbor detail ospfd# show ip ospf neighbor 1.2.3.4

ospfd# show ip ospf neighbor myifname detail all

Related Commands

show ip ospf route

Use the show ip ospf route command to display the OSPF routing table. Include the process ID parameter with this command to display the OSPF routing table for specified instances.

Command Syntax show ip ospf route

show ip ospf PROCESSID route

PROCESSID = <0-65535> The ID of the router process for which information will be displayed. If this parameter is included, only the information for this specified routing process is displayed.

Command Mode Priviledged Exec mode

Usage

The following are sample outputs from the show ip ospf route command with and without the process ID parameter. Notice that the first output (without process ID), shows information about both the instances and the second and third outputs show information only about the instances specified by the process ID.

ospfd# show ip ospf route OSPF process 100:

============ OSPF network routing table ============

N 10.10.10.0/24 [10] area: 0.0.0.0 directly attached to eth1

Dual Trunk E1 Router User’s Guide TECHNICAL: 0118 96 56 000 197