Black Box LRU4240 manual Terminal Interface Navigation, Setting a Menu Parameter

Dual Trunk E1 Router

Terminal Interface Navigation

The terminal interface contains a number of menus which are used to configure, monitor, and manage the Dual Trunk E1 Router.

•To navigate the fields in the menus, use the arrow keys on your keypad.

•To select a menu, press the menu number as indicated at the bottom of the menu screen.

•To change a parameter, use the arrow keys to cycle through the available options and press Return to select the highlighted option.

Setting a Menu Parameter

Use the following procedure to select a parameter, set it, and confirm your action:

NOTE: You can also use the u (up), d (down), r (right), and l (left) keys in place of the arrow keys.

1.Move the cursor to a field using the arrow keys, and press Return to activate edit mode.

To change a parameter, use the arrow keys to cycle through the available options and press Return to select the highlighted option. In other fields, you will be prompted for the required value. Enter the value, and press Return.

•Attaching the Dual Trunk E1 Router to your terminal

•Using Hyperterm to log on to the Dual Trunk E1 Router

•Configuring access rights

ATTACHING TO A TERMINAL

The Dual Trunk E1 Router can be attached via the COMM Port to the serial port of a server, computer, or terminal. You may need to attach your Dual Trunk E1 Router using the COMM Port on the rear of the device.

▼Connect an RJ-45 to DE-9 COMM Port cable from the COMM Port on the Dual Trunk E1 Router to the COMM Port on your terminal.

To communicate from an ASCII terminal to your device, use the COMM Port connector on the back panel of your Dual Trunk E1 Router (Figure 3-2).

COMM Port

Figure 3-2 COMM Port on Dual Trunk E1 Router

26 SALES: 0870 90 10 750 Dual Trunk E1 Router User’s Guide