Dual Trunk E1 Router

 

Table 4-16 Configuring Menu-0B SNMP

 

 

Procedure

Steps

 

 

Setting Third NMS IP addresses

1.Select 3rd NMS IP Address field

 

1.Enter IP address. The router will send trap messages to this

 

server.

 

2.Select 3rd Output Port field

 

3.Selects the port (COMM, NET, or Ethernet) over which the router will

 

send trap to the 1st NMS IP address. Default port is COMM..

 

 

CONFIGURING TIME AND DATE SYNCHRONIZATION

 

Table 4-17 Configuring Time and Date Synchronization

 

 

Procedure

Steps

 

 

Setting Time server synchronization

1.Select Menu-

 

2.Set Days, Hours, and Minutes frequency

 

 

Configuring Primary Time Server IP

1.Select Time Src Primary IP Address field

Addresse

2.Enter Time Server Primary IP address

 

 

3.Select physical port of which Time Server is connected to. ENET, ot

 

NET.

 

 

Configuring Secondary Time Server

1.Select Time Src Secondary IP Address field

IP Addresse

2.Enter Time Server Primary IP address

 

 

The router accesses both the primary and secondary time servers from the

 

same port.

 

 

Enable Time Synchonization

1.Select Automatic Sync field and set it to Enabled.

 

The router Time Client will start synchronizing time and date with the

 

designated Time Server.

 

 

Dual Trunk E1 Router User’s Guide

TECHNICAL: 0118 96 56 000

45

Page 57
Image 57
Black Box LRU4240 manual Configuring Time and Date Synchronization