Dual Trunk E1 Router

Table D-3 Menu-0B SNMP Configuration

 

 

 

 

 

 

Parameter

Description

 

 

 

 

 

 

TRAP

COMM, ENET, NET

 

 

2nd Output Port

Selects the DLCI (if applicable) and port over which the router will send a trap to the

 

 

2nd NMS IP address.

 

 

 

 

 

 

TRAP

COMM, ENET, NET

 

 

3rd Output Port

Selects the DLCI (if applicable) and port over which the router will send a trap to the

 

 

2nd NMS IP address.

 

 

 

 

 

Table D-4 Menu-0C Ethernet Configuration

 

 

 

 

 

 

Parameter

Description

 

 

 

 

 

MAC Address

Read-only Ethernet port MAC address assigned at factory.

 

 

 

 

Data speed mode

Ethernet port speed 10MB/Half (default) or 10MB/Full

 

 

 

 

ProxyARP

Reserved for IP Fast Forwarding mode. This feature is no longer supported.

 

 

Enable or disable ProxyARP in Fast forwarding mode. Default is disabled.

 

 

 

 

Net directed broadcast

Reserved for IP Fast Forwarding mode. This feature is no longer supported.

 

mode

Configurable option available in Fast Forwarding mode only. Enter the network

 

 

directed broadcast IP address mask

 

 

 

 

 

Fwd Multicast

Reserved for IP Fast Forwarding mode. This feature is no longer supported.

 

 

Configurable option available in Fast Forwarding mode only. Enable or disable

 

 

forwarding mulcast packets.

 

 

 

 

Table D-5 Menu-0E Performance Monitoring Configuration

 

 

 

 

 

Parameter

Parameter - Options; Definition

 

 

 

 

 

 

Interface

The network interface (NET1, NET2, or NET) to

which the DLCI is attached

 

 

 

 

DLCI

DLCIs will be autodiscovered if LMI is enabled on menu-0F. If LMI is not enabled, the

 

 

DLCIs must be entered manually on this table.

 

 

 

To change a DLCI status to Deleted, enter a zero for the DLCI number. If LMI is

 

 

enabled, and the DLCI still exists, it will be discovered again and its status returned toa

 

 

active.

 

 

 

Default: 0

 

 

 

 

 

CIR

The Committed information rate. If LMI revision 1 is being used, this will be

 

 

discovered; otherwise, you will need to enter the CIR for each DLCI

 

 

Default: 0

 

 

 

 

 

Delay Threshold

The range is 0 to 64000 milliseconds. When the round trip delay over the PVC exceeds

 

 

this value:

 

 

 

• An event will be registered in the Event Log

 

 

 

• A trap will be sent to the NMS (if configured)

 

 

 

• An alarm message will be displayed on the terminal user interface

 

 

• A delay threshold violation is counted

 

 

 

 

 

Dual Trunk E1 Router User’s Guide

TECHNICAL: 0118 931 2233

115

Page 127
Image 127
Black Box LRU4240 manual Parameter Parameter Options Definition, Dual Trunk E1 Router User’s Guide Technical 0118 931 115