Black Box LRU4240 manual Show ip ospf neighbor, Sales 0870 90 10

Dual Trunk E1 Router

The following is a sample output from the show ip ospf interface command. ospfd# show ip ospf interface hme0

hme0 is up, line protocol is up

Internet Address 10.10.10.50/24, Area 0.0.0.0

Router ID 10.10.11.50, Network Type BROADCAST, Cost: 10 Transmit Delay is 5 sec, State Waiting, Priority 1

No designated router on this network

No backup designated router on this network

Timer intervals configured, Hello 35, Dead 35, Wait 35, Retransmit 5 Hello due in 00:00:16

Neighbor Count is 0, Adjacent neighbor count is 0

Examples

ospfd# show ip ospf interface myifname

Related Commands

show ip ospf neighbor

Use the show ip ospf neighbor command to display information on OSPF neighbors. Include the process ID parameter with this command to display information about specified instances.

Command Syntax

show ip ospf neighbor A.B.C.DallDETAILINTERFACE

show ip ospf PROCESSID neighbor A.B.C.DallDETAILINTERFACE

PROCESSID = <0-65535> The ID of the router process for which information will be displayed. A.B.C.D = A.B.C.D (detail) Neighbor ID.

all = Include downstatus neighbor

DETAIL = detail (all) Detail of all neighbors INTERFACE = Interface (A.B.C.D) A.B.C.D = Address of the interface

Command Mode Priviledged Exec mode

Usage

The following are sample outputs from the show ip ospf neighbor command with and without the process IDparameter. Notice that the first output (without process ID), shows database information about both the instances and the second and third outputs show database information only about the instances specified by the process ID. The last two displays show the use of the detail and all parameters.

ospfd# show ip ospf neighbor
OSPF process 1:
Neighbor ID		Pri	State		Dead Time Address			Interface		RXmtL
RqstL DBsmL
10.10.11.50		5	Full/DR		00:00:40		10.10.10.50		eth1:10.10.10.90		0
0	0
OSPF process 100:
Neighbor ID		Pri	State		Dead Time		Address		Interface		RXmtL
RqstL DBsmL
10.10.11.50		5	Full/DR		00:00:40		10.10.10.50		eth2:10.10.11.90		0
0	0
ospfd# show ip ospf 1 neighbor
OSPF process 1:
Neighbor ID		Pri	State		Dead Time		Address		Interface		RXmtL
RqstL DBsmL
10.10.11.50		5	Full/DR		00:00:40		10.10.10.50		eth1:10.10.10.90		0
0	0
ospfd# show ip ospf 100 neighbor
OSPF process 100:
Neighbor ID		Pri	State		Dead Time		Address		Interface		RXmtL
RqstL DBsmL
10.10.11.50		5	Full/DR		00:00:40		10.10.10.50		eth2:10.10.11.90		0
0	0
ospfd# show ip ospf neighbor all
OSPF process 100:
Neighbor ID		Pri	State	Dead Time		Address		Interface	RXmtL RqstL DBsmL
10.10.11.51		1 Full/DR		00:00:38		10.10.10.10		hme0:10.10.10.50		0 0	0

196 SALES: 0870 90 10 750 Dual Trunk E1 Router User’s Guide