Dual Trunk E1 Router

KERNEL COMMAND REFERENCE

Kernel mode lets you access all the routing tables and interfaces and the various routing protocols modes.

interface IFNAME

Use the interface IFNAME command to change to configure terminal mode. Command Syntax: interface [net1 net2 mlppp e0]

The argument to this command is one of the router interface e0 for ethernet port, net1 for PPP1, net2 for PPP2, or bundle0 for multilink

Command Mode: Enable

Usage

There are no arguments or keywords for this command. The prompt will change to

Rip(config)#

Example

kernel(enable)#show interface net1

36:Interface net1

37:index 3 metric 1 mtu 1500 <UP,POINTOPOINT,RUNNING> kernel(enable)#show int net2

57:Interface net2

58:index 4 metric 1 mtu 1500 <UP,POINTOPOINT,RUNNING>

59:inet 60.10.2.2/24 pointopoint 60.10.2.1 secondary net2 kernel(enable)#show interface

39:Interface e0

40:index 1 metric 1 mtu 1500 <UP,BROADCAST,RUNNING>

41:HWaddr: 00:a0:c0:00:37:86

42:inet 172.18.65.10/24 broadcast 255.255.255.255 secondary e0

43:Interface mlppp

44:index 2 metric 1 mtu 1500 <>

45:Interface net1

46:index 3 metric 1 mtu 1500 <UP,POINTOPOINT,RUNNING>

47:Interface net2

48:index 4 metric 1 mtu 1500 <UP,POINTOPOINT,RUNNING>

49:inet 60.10.2.2/24 pointopoint 60.10.2.1 secondary net2

quit

Use the quit command to change exit from the current mode and return to the higher level mode.

Command Syntax: quit

Example

Kernel(config)#quit

Kernel(enable)#

debug zebos events

Use the debug zebos events command to specify the set of debug options for zebosd events. Command Syntax: debug zebos events

no debug zebos events

There are no arguments or keywords for this command. Command Mode: Enable

152

SALES: 0870 90 10 750

Dual Trunk E1 Router User’s Guide

Page 164
Image 164
Black Box LRU4240 manual Kernel Command Reference, Interface Ifname, Debug zebos events, Sales 0870 90 10