Black Box LRU4240 manual Ospf router-id, Ospf transmit-delay

Dual Trunk E1 Router

ospfd# configure terminal ospfd(config)# interface fxp0 ospfd(config-if)# ospf priority 3 10.10.10.50

Related Commands

show ip ospf

Equivalent Commands

ip ospf priority

ospf router-id

Use the ospf router-id command to specify a router ID for the OSPF process.

Use the no form of this command to disable this function.

Command Syntax

ospf router-id IPADDRESS no ospf router-id

IPADDRESS Specifies the router ID in IPv4 address format.

Command Mode

Router mode

Usage

Configure each router with a unique router-id. In an OSPF router process which has active neighbors, a new router-id is used at the next reload or when you start the OSPF manually.

Examples

The following example shows a specified router ID 2.3.4.5. ospfd# configure terminal

ospfd(config)# router ospf 100 ospfd(config-router)# ospf router-id 2.3.4.5

Related Commands

show ip ospf neighbor

ospf transmit-delay

Use the ospf transmit-delay command to set the estimated time it takes to transmit a link-state-update packet. Use the no form of this command to disable this function

Command Syntax

ospf transmit-delay DELAY no ospf transmit-delay

DELAY= <1-65535> the delay in seconds. The default transmit delay value is 1 second

Command Mode Interface mode

Usage

The transmit delay value adds a specified time to the age field of an update. If the delay is not added, the time in which the LSA transmits over the link is not considered. This command is especially useful for low speed links. Add transmission and propagation delays when setting the transmit delay value.

Examples

The following example shows setting the OSPF transmit-delay time to 3 seconds on the fxp0 interface for the IP address 10.10.10.50.

ospfd# configure terminal ospfd(config)# interface fxp0 ospfd(config-if)# ospf transmit-delay 3 10.10.10.50

Equivalent Commands

ip ospf transmit-delay

passive-interface

Use this command to suppress the routing updates on the specified interface.

Command Syntax

Dual Trunk E1 Router User’s Guide TECHNICAL: 0118 96 56 000 183