Black Box LRU4240 manual Configuring LAN Interface, Setting ID, DATE, TIME, and Network Timing

Dual Trunk E1 Router

CONFIGURING LAN INTERFACE

	Table 4-2 Configuring LAN interface
Procedure	Steps
Setting Ethernet port speed	To configure the ethernet speed to 10MB/Half or 10MB/Full.
	1.Select Menu-0C
	2.Select Data/Speed Mode
	3.Select 10MB/Half or 10MB/Full setting. The default value is
	10MB/Half.
Modifying Ethernet port IP address	1.Select Menu-0A
	2.Select ENET IP Address/Len field
	3.Enter the assigned Ethernet port IP Address and the subnet mask

SETTING ID, DATE, TIME, AND NETWORK TIMING

Unit Configuration− Menu 4A

Figure 4-1shows Menu 4A Unit Configuration. The numbers in circles correspond to the procedures for setting the parameters in each field.

2

1

3

	Figure 4-1Menu 4A, Unit Configuration
	Table 4-3 Menu-4A- Unit Configuration
Parameter	Description
UNIT ID	Field Local 1 (Alphanumeric field identifier at the top of the menu)
	The Dual Trunk E1 Router comes factory configured with a unique unit ID. Each
	Dual Trunk E1 router in your network must have a unique Unit ID. You may use the
	preconfigured Unit ID or change it to a combination of 6 alpha and numeric
	characters, but the first character must be an alpha character.

Dual Trunk E1 Router User’s Guide TECHNICAL: 0118 96 56 000 35