Dual Trunk E1 Router

Router mode

Usage

Examples

ospfd# configure terminal ospfd(config)# router ospf 100 ospfd(config-router)# refresh timer 12

Related Commands

router-id

Use the router-id command to set a fixed router-id.

Use the no form of this command to force OSPF to use the previous OSPF router-id behavior.

Command Syntax router-id IPADDRESS

no router-id

IPADDRESS Specifies the router ID in IPv4 address format. Default

Command Mode

Router mode

Usage

Examples

The following example shows a fixed router ID 10.10.10.60 ospfd# configure terminal

ospfd(config)# router ospf 100 ospfd(config-router)# router-id 10.10.10.60

Related Commands

router ospf

Use the router ospf command to enter router mode and to configure an OSPF routing process. Specify the process ID with this command to configure multiple instances.

Use the no form of this command to terminate an OSPF routing process. Use the no form of this command with the process ID parameter, to terminate and delete a specific OSPF routing process.

Command Syntax (no) router ospf

(no) router ospf PROCESSID

PROCESSID = <1-65535> Any positive integer identifying a routing process. The process ID should be unique for each routing process.

Default

No routing process defined.

Command Mode

Configure mode

Usage

For releases starting with 1.1, router ospf command forces the router into compatibility mode. This mode supports only one OSPF instance and prevents the creation of other instances of OSPF. For multiple instances-- first, use the norouter ospf command to end the single instance routing process, and then, configure multiple instances by specifying the process ID parameter for each instance.

Examples

This example shows the use of router ospf command to enter router mode. Note the change in the prompt. ospfd# configure terminal

ospfd(config)# router ospf ospfd(config-router)#

Related Commands set metric-type

Dual Trunk E1 Router User’s Guide

TECHNICAL: 0118 96 56 000

185

Page 197
Image 197
Black Box LRU4240 manual Router-id, Command Syntax router-id Ipaddress, Router ospf, Command Syntax no router ospf