Black Box LRU4240 Traffic type, Unit alarm, Unit ansi-fdl, Unit clock, Unit comm-port, Unit id

Dual Trunk E1 Router

traffic type

Use the traffic command to set the WAN protocol to Frame Relay or PPP. Command Syntax:

traffic type [frame-relay ppp]

unit alarm

Use the unit alarm command to configure the network alams that will be generated to the NMS. Command Syntax:

unit alarm inband-lonk-loss [enabled disabled]

unit alarm interface [net aux] [carrier-loss sync-loss ais-received yellow-received] [enabled disabled] unit alarm interface enet carrier-loss [enabled disabled]

unit ansi-fdl

Use the unit ansi-fdlcommand to enable or disable standard remote monitoring ansi-fdl. Command Syntax:

unit ansi-fdl [enabled disabled]

unit clock

Use the unit clock command to configure the primary and secondary clock. Command Syntax:

unit clock primary [net net1 net2 aux internal] unit clock secondary [net net1 net2 aux internal]

unit comm-port

Use the unit comm-portcommand to configure the console port and flow control. mand Syntax:

unit comm-port baud [9600 14400 19200 28800 38400] unit comm-port dcd [enabled disabled]

unit comm-port parity [none odd even] unit comm-port stop-bits [1 2]

unit comm-port word-length [7-8]

unit comm-port xon-xoff [disabled xoff-until-xon xoff-unti-any]

unit id

Use the unit id command to set the unit identifier Command Syntax:

unit id [HOSTNAME]

unit idle-code

Use the unit idle-codecommand to set the idle code. Command Syntax:

unit idle-code [0-ff]

unit management

Use the unit management command to configure the dial out management feature. Command Syntax:

unit management connection [direct fdl modem]

unit management connection-timeout-logged-on [unlimited 1-minute 10-minutes 30-minutes] unit management connection-timeout-not-logged-on [unlimited 1-minute 10-minutes 30-minutes] unit management dial-out-time [0-255]

unit management phone1 WORD unit management phone2 WORD

150 SALES: 0870 90 10 750 Dual Trunk E1 Router User’s Guide