Cabletron Systems TRMMIM Setting a Station Name

Ring Map

3-8 Viewing Station-speciﬁc Information

Utilization

The percentage of the total usable bandwidth (4 or 16 Mb) that is currently being

used by the station. This ﬁeld will update after each polling interval.

Performance and Errors

Error and performance statistics for the selected station are displayed according

to the currently selected calculation mode. Statistics displayed are:

• Frames

• Bytes

• Line

• Burst

•AC

• Abort Seq

• Internal

• Lost Frames

• Congestion

• Frame Copied

• Token

• Frequency

See Viewing the Error Table, page 3-14, for detailed deﬁnitions of these statistics.

Setting a Station Name

Using the Ring Map window, you can administratively assign a name to any

station on the monitored ring network.

To do so:

1. Click mouse button 3 on any station label in the map.

2. Drag down to Set Name, and release. The Set Station Name window,

Figure 3-4, will appear.

Figure 3-4. Set Station Name Window

3. In the Enter Name te xt ﬁeld, enter a name (up to 10 ASCII char acters) f or the

selected station.

4. Click on . The new name will be set at the station.

Contents

Main Page i Notice Virus Disclaimer ii Restricted Rights Notice (Applicable to licenses to the United States Government only.) iii Contents Chapter 2 Using the TRMMIM Hub View Chapter 1 Introduction to SPMA for the TRMMIM Chapter 3 Ring Map Chapter 5 Statistics Chapter 4 Alarm Conguration Chapter 6 Ring Security Conguration Appendix A TRMMIM MIB Structure Page 1-1 Chapter 1 The TRMMIM; how to use the TRMMIM Users Guide; manual conventions; contacting Cabletron Introduction to SPMA for the TRMMIM Using the TRMMIM Users Guide The TRMMIM Whats NOT in the TRMMIM Guide... Conventions 1-3 Conventions Screen Displays Page Using the Mouse 1-6 Getting Help Getting Help Page Page 2-1 Chapter 2 Using the TRMMIM Hub View Using the Hub View 2-2 Using the Hub View Navigating Through the Hub View Hub View Front Panel 2-4 Using the Hub View Using the Hub View 2-5 Using the Mouse in a Hub View Module Page 2-8 Using the Hub View Hub View Port Color Codes Port Display Form Using the Hub View 2-9 2-10 Using the Hub View FNB Display Monitoring Hub Performance 2-11 Monitoring Hub Performance 2-12 Monitoring Hub Performance Monitoring Hub Performance 2-13 Checking Device Status and Updating Front Panel Info 2-14 Monitoring Hub Performance Checking Module Status Monitoring Hub Performance 2-15 2-16 Monitoring Hub Performance Checking Port Status Monitoring Hub Performance 2-17 Checking Station Status 2-18 Monitoring Hub Performance Monitoring Hub Performance 2-19 2-20 Monitoring Hub Performance Checking Ring Port Status Monitoring Hub Performance 2-21 2-22 Monitoring Hub Performance Checking Statistics Monitoring Hub Performance 2-23 2-24 Managing the Hub Managing the Hub Managing the Hub at the Device Level Find MAC Address Managing the Hub at the Device Level 2-25 Setting the Polling Intervals 2-26 Managing the Hub at the Device Level not Managing the Hub at the Device Level 2-27 Managing the Hub at the Module Level Controlling Token Ring FNB Multiplexer Connections Managing the Hub at the Module Level 2-29 2-30 Managing the Hub at the Module Level Managing the Hub at the Module Level 2-31 Controlling Token Ring Speed 2-32 Managing the Hub at the Module Level Controlling Token Ring MIM Management Mode Enabling All Ports on Token Ring Modules Managing the Hub at the Port Level 2-33 Managing the Hub at the Port Level Converting a Station Port to a Ring-out Port Enabling and Disabling Station and Ring Ports 2-34 Managing the Hub at the Port Level Removing a Station from the Ring Chapter 3 Ring Map 3-2 Launching the Ring Map Launching the Ring Map Selecting a Ring to Map 3-3 Selecting a Ring to Map 3-4 Selecting a Ring to Map Selecting a Ring to Map 3-5 3-6 Viewing Station-specic Information Viewing Station-specic Information The Quick Info Popup Window Page 3-8 Viewing Station-specic Information Setting a Station Name Viewing Station-specic Information 3-9 Setting a Station Drop Viewing Management Station Conguration or 3-10 Viewing Station-specic Information Viewing Station-specic Information 3-11 3-12 Viewing Station-specic Information Viewing Ring-level Information 3-13 Viewing Ring-level Information Setting the Statistics Calculation Mode 3-14 Viewing Ring-level Information Viewing the Error Table Viewing Ring-level Information 3-15 3-16 Viewing Ring-level Information Viewing Ring-level Information 3-17 3-18 Viewing Ring-level Information Changing the Station Labels Viewing Ring-level Information 3-19 Viewing Device Information 3-20 Viewing Ring-level Information Setting the Map Poll Interval Viewing Ring-level Information 3-21 Viewing Beacon History 3-22 Viewing Ring-level Information Viewing Ring-level Information 3-23 Beacon Conguration 3-24 Viewing Ring-level Information Using the Find Options 3-25 Using the Find Options 3-26 Using the Find Options Searching for a Stations Nearest Active Upstream or Downstream Neighbor Searching by Station Name, MAC Address, Board/Port, or Drop Using the Find Options 3-27 Searching for the Active Monitor, Ring Management Station, or Last Beaconing Station 3-28 Using the Find Options Searching by Highest or Lowest Occurrence of a Performance Parameter Using the Find Options 3-29 3-30 Accessing Other SPMA Applications Accessing Other SPMA Applications 4-1 Chapter 4 Alarm Conguration Setting Alarms at the Ring and Station levels; Alarm Types dened 4-2 Setting and Viewing Ring Alarms 4-3 Setting and Viewing Ring Alarms 4-4 Setting and Viewing Ring Alarms Setting and Viewing Station Alarms 4-5 Setting a Ring Level Alarm all Setting and Viewing Station Alarms Page Setting and Viewing Station Alarms 4-7 4-8 Setting and Viewing Station Alarms Setting and Viewing Station Alarms 4-9 Setting a Station Level Alarm Selected Stations Ring All Stations on All Stations On Module Page 5-1 Chapter 5 Statistics Using Statistics 5-2 Viewing the Ring Station List Viewing the Ring Station List Viewing the Ring Station List 5-3 5-4 Monitoring Ring and Station Statistics Using the Reverse MAC Button Refreshing the Station List Monitoring Ring and Station Statistics Monitoring Ring and Station Statistics 5-5 Creating a Pie Chart 5-6 Monitoring Ring and Station Statistics Creating a Graph or Meter Page 5-8 Ring and Station Variables Ring and Station Variables General Protocols Ring and Station Variables 5-9 Frame Sizes Isolating Errors 5-10 Ring and Station Variables Non-Isolating Errors Ring and Station Variables 5-11 Page 6-1 Chapter 6 Ring Security Conguration About Ring Security 6-2 Launching the Security Conguration Window Launching the Security Conguration Window Launching the Security Conguration Window 6-3 6-4 Launching the Security Conguration Window Launching the Security Conguration Window 6-5 6-6 Launching the Security Conguration Window Conguring Security 6-7 Conguring Security Building the Allowed List Automatically Adding New Stations to the Allowed or Disallowed Stations List 6-8 Conguring Security Deleting Stations from the Allowed or Disallowed Lists Conguring Security 6-9 Moving a Station Between the Allowed and Disallowed Stations List Clearing All Entries in the Allowed or Disallowed List 6-10 Conguring Security Changing the Ring Security Mode A-1 Appendix A TRMMIM MIB Structure TRMMIM management information base conguration IETF MIB Support TRMMIM MIB Structure A-2 TRMMIM MIB Structure TRMMIM MIB Structure A-3 A Brief Word About MIB Components and Community Names A-4 TRMMIM MIB Structure Index-1 Index A B C Index-2 D E F G H K L M N O Q R S T U