Frames, Total Bytes, Errors, Port Type | Cabletron Systems TRMMIM

Using the TRMMIM Hub View

2.Drag down to Port Display Form, then right to select one of the port display options. The current selection will be displayed in the Port Display Form text box(es) on the module display.

Port display form options are:

Frames

Shows the total number of frames transmitted by the port, in a frames/second format.

Total Bytes

Shows the total number of bytes transmitted by the port, in a bytes/second format.

Errors

Shows port trafﬁc errors as a rate (errors/second). You can display any one of the following types of errors:

•Total errors

•Isolating errors

•Non-isolating errors

•Line errors

•Burst errors

•AC errors

•Abort Sequence errors

•Internal errors

•Lost Frame errors

•Rx Congestion errors

•Frame Copied errors

•Token errors

•Frequency errors

For error type descriptions, see Checking Statistics, page 2-22.

NOTE

When a device is reset, statistics windows and/or statistics displays in the Hub View may display very large numbers for one polling interval. This is due to the resetting of the counters.

Port Type

Provides the following administrative information about the port:

•Admin/Link Status indicates the Administrative and Link connection status of the ports:

-ENB (Enabled) indicates that the port has been enabled by management, but there is no station linked to the port.

-BYP (Bypassed) indicates the port has been disabled by management.

Using the Hub View

2-9

Image 25

Cabletron Systems TRMMIM manual Frames, Total Bytes, Errors, Port Type

Contents

Trmmim Page Virus Disclaimer Applicable to licenses to the United States Government only Restricted Rights Notice Contents Chapter Ring Map Chapter Alarm ConﬁgurationChapter Statistics Appendix a Trmmim MIB Structure Chapter Ring Security Conﬁguration Contents Trmmim Using the Trmmim User’s Guide Introduction to Spma for the Trmmim What’s not in the Trmmim Guide Screen Displays Conventions Introduction to Spma for the Trmmim Button Using the Mouse FTP Getting Help Trmmim Firmware Introduction to Spma for the Trmmim Trmmim Firmware Using the Hub View Using the Trmmim Hub View Navigating Through the Hub View Using the Trmmim Hub View Trmmim Hub View Hub View Front Panel Time and Date UptimeDevice Name Device Location Using the Trmmim Hub View Using the Mouse in a Hub View Module Module Index FNB Bypass State Port Display Form Hub View Port Color Codes Frames ErrorsTotal Bytes Port Type FNB Display Monitoring Hub Performance Using the Trmmim Hub View Name and Location Checking Device Status and Updating Front Panel Info Contact Checking Module StatusDate and Time Total Rings Speed Fault Location Speed FaultModule Name Module Checking Port Status Admin StatePort Name Module/Port Link State Time Checking Station StatusInsertion Trap Vendor Station NameUpstream Neighbor/Downstream Neighbor Priority Physical LocationPort Mapping Reverse MACs Conﬁguring Station Name, Location, or Priority Checking Ring Port Status Media Fault Fault State TimeClass Media Type Checking Statistics Line BytesBurst Abort Managing the Hub at the Device Level Managing the HubFind MAC Address 12. The Find MAC Address Window Setting the Polling Intervals Contact Status 13. Trmmim Polling Intervals Device Conﬁguration Device General StatusPort Operational State Statistics Controlling Token Ring FNB Multiplexer Connections Managing the Hub at the Module Level INS Left Connect BoardRight Connect Bypass Clearing the Module FNB Conﬁguration Window Selections Controlling Token Ring Speed Enabling All Ports on Token Ring Modules Controlling Token Ring MIM Management ModeAuto AUT Management MGT Converting a Station Port to a Ring-out Port Managing the Hub at the Port LevelEnabling and Disabling Station and Ring Ports Removing a Station from the Ring Ring Map Launching the Ring Map From the command line stand-alone modeFrom the icon From the Hub View Ring Name Selecting a Ring to Map Ring Map Stations SpeedName Utilization Quick Info Popup Window Viewing Station-speciﬁc Information Drop Board and Port Performance and Errors Setting a Station Name Viewing Management Station Conﬁguration Setting a Station Drop Commands Open Status Error Status Active Monitor Error Error Report Timer Setting the Statistics Calculation ModeViewing Ring-level Information Set Calculation Mode Window Viewing the Error Table Error Table Window Isolating Errors Total Errors Non-Isolating Errors Changing the Station Labels Viewing Device Information Device Information Window Setting the Map Poll Interval Active Monitor Changes Viewing Beacon HistoryRing Purges Beacon Events Longest Beacon Last Beacon TypeLast Beacon Beacon Conﬁguration 12. The Beacon Conﬁguration Window Using the Find Options 13. Sample Find Windows Searching by Station Name, MAC Address, Board/Port, or Drop Finding the Active Monitor on the Network Finding the Management Station on the Network Frames or Errors measured/Δ Time in seconds 14. Sample Find Highest and Lowest Windows Accessing Other Spma Applications Alarm Conﬁguration Spmarun e5alarms IP address community name Setting and Viewing Ring Alarms Alarm Conﬁguration Setting a Ring Level Alarm Setting and Viewing Station Alarms Alarm Conﬁguration Alarm Conﬁguration Alarm Conﬁguration Setting a Station Level Alarm Alarm Conﬁguration Setting and Viewing Station Alarms Statistics Using Statistics Spmarun e5stats IP Address community name Viewing the Ring Station List Stn Name Module and PortUpstream Addr Downstream Addr Monitoring Ring and Station Statistics Using the Reverse MAC ButtonRefreshing the Station List Creating a Pie Chart Creating a Graph or Meter Click mouse button 1 on General Ring and Station VariablesProtocols KBytes Line Errors Isolating ErrorsBurst Error AC Error Abort Error Non-Isolating ErrorsInternal Error Frequency Errors Token Errors Statistics Ring and Station Variables About Ring Security Ring Security Conﬁguration Ring Security Conﬁguration Launching the Security Conﬁguration Window Security Conﬁguration Ring Selection window, -1, will appear Allowed Count Allowed Station ListDisallowed Station List Disallowed Count Disable Security Security Mode OptionsEnable Security Allowed/Disallowed List Conﬁguration Buttons Building the Allowed List Automatically Conﬁguring Security Station Addition Window Deleting Stations from the Allowed or Disallowed Lists Clear List Window Clearing All Entries in the Allowed or Disallowed List Remove Changing the Ring Security Mode Trmmim MIB Structure Ietf MIB Support Protocol Stack Chassis MGRSnmp Agent Network One, Network Two Telnet Brief Word About MIB Components and Community Names Trmmim MIB Structure Index Index-2 Index-3 Index-4