Uptime, Time and Date, Device Name | Cabletron Systems TRMMIM

Using the TRMMIM Hub View

Uptime

The time that the device has been running without interruption. The counter resets to 0 days 00:00:00 (days HH:MM:SS) when one of the following occurs:

•Power to the MMAC chassis is cycled.

•The device is reset manually.

Time and Date

The date and time are taken from the device’s internal clock.

Device Name

A text ﬁeld that you can use to help identify the device.

Device Location

A text ﬁeld that you can use to help identify the device.

NOTE

If the TRMMIM you are modeling is installed in an MMAC-3 chassis, its window titles will be truncated. If you have assigned a device name or location that contains more than 19 characters, only the ﬁrst 19 will be displayed in the Hub View. Check the Device Status window for the complete name and/or location, if necessary. See Checking Device Status and Updating Front Panel Info, on page 2-13,for details.

IP Address

The device’s Internet Protocol (IP) address. You can’t change the TRMMIM’s IP address from SPMA.

MAC Address

The device’s factory-set hardware address. The MAC address cannot be changed from SPMA.

Clicking on the Device button displays the Device menu, Figure 2-2.

2-4	Using the Hub View

Image 20

Cabletron Systems TRMMIM manual Uptime, Time and Date, Device Name, Device Location, IP Address, MAC Address

Contents

Trmmim Page Virus Disclaimer Restricted Rights Notice Applicable to licenses to the United States Government only Contents Chapter Statistics Chapter Alarm ConﬁgurationChapter Ring Map Chapter Ring Security Conﬁguration Appendix a Trmmim MIB Structure Contents Using the Trmmim User’s Guide Trmmim What’s not in the Trmmim Guide Introduction to Spma for the Trmmim Conventions Screen Displays Introduction to Spma for the Trmmim Using the Mouse Button Getting Help FTP Trmmim Firmware Introduction to Spma for the Trmmim Trmmim Firmware Using the Trmmim Hub View Using the Hub View Using the Trmmim Hub View Navigating Through the Hub View Hub View Front Panel Trmmim Hub View Uptime Time and DateDevice Name Device Location Using the Trmmim Hub View Using the Mouse in a Hub View Module Module Index FNB Bypass State Hub View Port Color Codes Port Display Form Errors FramesTotal Bytes Port Type FNB Display Monitoring Hub Performance Using the Trmmim Hub View Checking Device Status and Updating Front Panel Info Name and Location Checking Module Status ContactDate and Time Total Rings Speed Fault Speed Fault LocationModule Name Module Admin State Checking Port StatusPort Name Module/Port Insertion Trap Checking Station StatusLink State Time Upstream Neighbor/Downstream Neighbor Station NameVendor Physical Location PriorityPort Mapping Reverse MACs Checking Ring Port Status Conﬁguring Station Name, Location, or Priority Fault State Time Media FaultClass Media Type Checking Statistics Bytes LineBurst Abort Find MAC Address Managing the HubManaging the Hub at the Device Level Setting the Polling Intervals 12. The Find MAC Address Window 13. Trmmim Polling Intervals Contact Status Device General Status Device ConﬁgurationPort Operational State Statistics Managing the Hub at the Module Level Controlling Token Ring FNB Multiplexer Connections INS Board Left ConnectRight Connect Bypass Controlling Token Ring Speed Clearing the Module FNB Conﬁguration Window Selections Controlling Token Ring MIM Management Mode Enabling All Ports on Token Ring ModulesAuto AUT Management MGT Enabling and Disabling Station and Ring Ports Managing the Hub at the Port LevelConverting a Station Port to a Ring-out Port Removing a Station from the Ring Ring Map From the command line stand-alone mode Launching the Ring MapFrom the icon From the Hub View Selecting a Ring to Map Ring Name Ring Map Speed StationsName Utilization Viewing Station-speciﬁc Information Quick Info Popup Window Board and Port Drop Setting a Station Name Performance and Errors Setting a Station Drop Viewing Management Station Conﬁguration Commands Error Status Open Status Error Active Monitor Viewing Ring-level Information Setting the Statistics Calculation ModeError Report Timer Viewing the Error Table Set Calculation Mode Window Error Table Window Total Errors Isolating Errors Non-Isolating Errors Changing the Station Labels Viewing Device Information Setting the Map Poll Interval Device Information Window Viewing Beacon History Active Monitor ChangesRing Purges Beacon Events Last Beacon Last Beacon TypeLongest Beacon Beacon Conﬁguration 12. The Beacon Conﬁguration Window Using the Find Options Searching by Station Name, MAC Address, Board/Port, or Drop 13. Sample Find Windows Finding the Active Monitor on the Network Finding the Management Station on the Network Frames or Errors measured/Δ Time in seconds Accessing Other Spma Applications 14. Sample Find Highest and Lowest Windows Alarm Conﬁguration Spmarun e5alarms IP address community name Setting and Viewing Ring Alarms Alarm Conﬁguration Setting and Viewing Station Alarms Setting a Ring Level Alarm Alarm Conﬁguration Alarm Conﬁguration Alarm Conﬁguration Setting a Station Level Alarm Alarm Conﬁguration Setting and Viewing Station Alarms Using Statistics Statistics Viewing the Ring Station List Spmarun e5stats IP Address community name Module and Port Stn NameUpstream Addr Downstream Addr Refreshing the Station List Using the Reverse MAC ButtonMonitoring Ring and Station Statistics Creating a Pie Chart Creating a Graph or Meter Click mouse button 1 on Ring and Station Variables GeneralProtocols KBytes Isolating Errors Line ErrorsBurst Error AC Error Internal Error Non-Isolating ErrorsAbort Error Token Errors Frequency Errors Statistics Ring and Station Variables Ring Security Conﬁguration About Ring Security Launching the Security Conﬁguration Window Ring Security Conﬁguration Security Conﬁguration Ring Selection window, -1, will appear Allowed Station List Allowed CountDisallowed Station List Disallowed Count Enable Security Security Mode OptionsDisable Security Allowed/Disallowed List Conﬁguration Buttons Conﬁguring Security Building the Allowed List Automatically Deleting Stations from the Allowed or Disallowed Lists Station Addition Window Clearing All Entries in the Allowed or Disallowed List Clear List Window Changing the Ring Security Mode Remove Ietf MIB Support Trmmim MIB Structure Chassis MGR Protocol StackSnmp Agent Network One, Network Two Brief Word About MIB Components and Community Names Telnet Trmmim MIB Structure Index Index-2 Index-3 Index-4